Bedienungsanleitung Victron Cebro GX (Seite 44 von 59) (Englisch)

785236

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

• SDXC type microSD cards which have greater than 32 GB capacity are often formatted with exFAT, and therefore cannot be

used with the Cerbo GX without reformatting and possibly re-partitioning.

Manually transferring datalogs to VRM

For devices permanently without Internet, it is possible to take the data out, and then upload it manually from a laptop.

1. go to Settings → VRM Portal, and click Eject the storage. Make sure to never just remove the SD-card/USB-stick, this can

lead to corruption and data loss.

2. now, remove the storage device and insert it into a computer or laptop that is connected to the internet.

3. open a webbrowser, and navigate to the VRM Portal.

4. Login, and then click the 'Upload GX file' option, and follow instructions:

5. Remove the file from the storage device, and then it re-insert it into the GX Device. Note that uploading the same data twice

does not cause any problems; but still it is better not to do that.

With a log interval of once per minute, the required storage space roughly amounts to about 25 MB per month, depending on the

number of connected products. So with a 1 GB microSD card, you can store about 3 years of backlog. In other words, any mi-

croSD card or USB stick should be sufficient to store the 6 months of data which VRM retains.

When the storage device is full, no more data will be logged.

If multiple storage devices are inserted, the GX device will store the data on the one inserted first. When that is removed, it

will not use the other one. Instead, it will create an internal backlog buffer. Only inserting a new one will make it switch to using

external storage again.

Network watchdog: auto-reboot

This feature, disabled by default, makes the GX device automatically reboot itself in case it has not been able to connect to the

VRM Portal.

Please be careful with enabling this feature on ESS systems: when grid connection is lost, and the GX device reboots, the system

can lose power when rebooting takes too long (when grid is present, the Multi's or Quattro's will enter passthru).

9.4. Trouble shooting data logging

This chapter explains what to do when the GX Device cannot transmit data to the VRM Portal.

The communication required to send logs to the VRM Portal is:

1. Working DNS

2. Proper IP address

3. Working internet connection

4. Outbound http(s) connection to http://ccgxlogging.victronenergy.com on port 80 and 443. Note that should never be an issue,

unless on very specialized company networks.

Note that the Cerbo GX does not support a proxy setup. For more details on the required networking, see here.

Step 1: Update the GX Device to the latest available firmware

GX Device firmware update instructions

Step 2: Verify the network and internet connection

Cerbo GX Manual

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Victron Cebro GX Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info