785222
37
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
Are you using the Windows version of the VictronConnect App? The Windows version cannot use Bluetooth. Use an Android,
iOS or macOS device instead.
Has Bluetooth been disabled in the VictronConnect settings?
Does VictronConnect have an issue? Try to connect to another Victron product, does this work? If that also does not work, then
there probably is an issue with the phone or tablet. Refer to the troubleshooting section of the VictronConnect manual.
Pin code lost
If you have lost the PIN code, you will need to reset the PIN code to its default PIN code. This is done in the VictronConnect App.
Navigate to the device list of the VictronConnect App. Click on the option symbol next to the product listing.
A new window will open which allows you to reset the PIN code back to its default: 000000.
Enter the batteries unique PUK code as printed on the product information sticker on the product.
More information and specific instructions can be found in the VictronConnect manual.
Interrupted firmware update
This is recoverable, just try to update the firmware again.
10.6. GX device issues
This chapter only describes the most common issues. If this chapter does not solve your issue, consult the manual of the GX
device.
Incorrect CAN-bus profile selected
Check that VE.Can is set to use the correct CAN-bus profile. Navigate to settings/services/VE.Can port and check if it is set to
"VE.Can and Lynx Ion BMS 250kb.
RJ45 terminator or cable issue
VE.Can devices connect in "daisy chain" to each other and a RJ45 terminator needs to be used with the first and last device in
the chain.
When connecting VE.Can device always use "manufactured" RJ45 UTP cables. Do not manufacture these cables yourself. Many
communication and other seemingly unrelated product issues are caused by faulty home made cables.
Lynx Smart BMS
Page 34 Troubleshooting and Support
37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Victron Lynx Smart BMS 500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info