Bedienungsanleitung Viessmann ViCare floor thermostat (Seite 7 von 28) (Englisch)

813863

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

The ViCare floor thermostat is designed exclusively for

operation in residential or commercial buildings. Incor-

rect use of the device (e.g. commercial or industrial

use other than for control purposes) is prohibited and

will result in an exclusion of liability.

Installation, service and operating instructions included

with the product and available online must be

observed. Use the ViCare floor thermostat exclusively

for monitoring, operating and optimising systems with

the user interfaces and communication interfaces

specified for this purpose in the relevant printed docu-

mentation. With regard to the communication interfa-

ces, ensure on site that the system requirements

specified in the product documentation are met at all

times for every transfer medium employed.

Note

The device is intended exclusively for domestic or

semi-domestic use, i.e. even users who have not had

any instruction are able to operate the device safely.

Product information

The ViCare floor thermostat enables intelligent control

of the underfloor heating system with up to 6 heating

zones and 18 thermal actuators.

The ViCare floor thermostat can only be used in con-

junction with:

■Heat generator with Viessmann One Base

■Viessmann heat generator with Vitoconnect, e.g.

type OPTO2

■Vitoconnect, e.g. type OPTO2 without connection to

a Viessmann heat generator

The ViCare floor thermostat and a heat generator with

Viessmann One Base or Vitoconnect communicate via

low power radio.

Functions

■The zones of the ViCare floor thermostat can be

included in energy efficient and convenient individual

room control.

■Individual automatic time programs and manual

operation can also be used in individual room con-

trol.

■The ViCare floor thermostat has a switching contact

for the heat demand or solenoid valve control.

■In operation with the heat generator with Viessmann

One Base or Vitoconnect, e.g. type OPTO2, the heat

demand is automatically determined and optimally

controlled.

Note

At least 1 temperature value from a ViCare climate

sensor is required per heating circuit.

■The ViCare floor thermostat has an internal frost pro-

tection function that prevents the pipes from freezing.

If the flow temperature falls below approx. 8 °C, the

ViCare floor thermostat opens until the flow tempera-

ture is reached again.

■Includes a function to protect the heating circuits if

communication fails with the heat generator with

Viessmann One Base or Vitoconnect, e.g.

type OPTO2. The heat demand is activated and all

valves are controlled with 10 %. When communica-

tion is resumed, the valves return to normal mode.

■The ViCare floor thermostat is compatible for opera-

tion with 230 V "normally closed" thermal actuators

(on site).

■The ViCare floor thermostat is automatically deacti-

vated by the heat generator with Viessmann One

Base or Vitoconnect, e.g. type OPTO2, if the heat

generator also interrupts heating operation. E.g.

summer mode; only DHW mode is active.

■To prevent the valves from sticking, the valve outputs

are opened for 8 minutes every 30 days after they

were last actuated.

■The ViCare floor thermostat also functions as a low

power radio repeater.

Introductory information

Intended use (cont.)

6152540

Information

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Viessmann ViCare floor thermostat Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info