A
LED
1.
Press B on the wireless receiver for
approx. 10 s until LED
r
flashes.
2. Open the flap of the Vitotrol 100.
3. Press twice.
4. Select "Settings" with / .
5. Confirm with OK.
6. Select "Service" with / .
7. Confirm three times with OK.
8. Select "Address code" with / .
9. Confirm with OK.
After approx. 30 s the display shows
"Transmitting".
The transfer takes approx. 30 s.
During the transfer, LED flashes
briefly.
Once the address code is recognised,
the LEDs go out; otherwise repeat the
procedure.
What to do if...
Changing the address code
5592 620 GB