813773
15
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
15
Note
For further information on the ViGuide mobile app: See
www.viguide.info
In order to connect, you may need to remove the
Vitotrol from the mounting base.
1. On the heat pump control unit, enable low power
radio.
Vitocal operating instructions
2. Install the ViGuide mobile app from the Apple App
Store or Google Play Store on a mobile device.
3. Launch the ViGuide mobile app.
4. To register, follow in the instructions in the app.
5. Assign the Vitotrol 100-EH to the heat pump via
the ViGuide mobile app.
6. Assign the Vitotrol 100-EH to the required heating
circuit, cooling circuit or heating/cooling circuit via
the ViGuide mobile app.
Note
Any subsequent change can be made only via the
ViGuide mobile app.
Commissioning the Vitotrol 100-EH
Note
The Vitotrol 100-EH must always be commissioned
with the ViGuide mobile app, both for connected and
non-connected systems.
The Vitotrol needs to be commissioned in the following
cases:
When the Vitotrol is installed for the first time.
When the heat pump's TCU communication module
has been replaced.
When the Vitotrol is reset to factory settings.
On the screen, "SW VERS" is displayed with the soft-
ware version of the device.
Press the following buttons:
01. OK for "LANGUAGE"
02. / to set the required language.
03. OK to confirm.
"FORMAT" is displayed.
04. / to select the required time format.
05. OK to confirm.
"WEEK TYPE" is displayed.
06. / to select whether days of the week
should be displayed as "NUMBER" or "WORD".
07. OK to confirm.
"STARTPAIR" is displayed.
08. OK to confirm.
"PAIRING" is displayed.
While the connection to the heat pump is being
established, a percentage progress indicator
"PROC" is displayed.
09. Launch the ViGuide mobile app.
10. Follow the instructions in the app to establish the
connection to the heat pump.
Note
To cancel the connection attempt, press .
The connection attempt is displayed via a pro-
gress bar in percent.
It can take up to 6 minutes to establish the con-
nection.
The settings on the heat pump are transferred to
the Vitotrol 100-EH during commissioning.
If the connection to the heat pump could not be
established, the Vitotrol 100-EH display will
show "RETRY". Restart the attempt by pressing
OK.
Commissioning
Connecting the Vitotrol to the heat pump
6197279
Commissioning
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Viessmann Vitotrol 100-EH wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Viessmann Vitotrol 100-EH

Viessmann Vitotrol 100-EH Bedienungsanleitung - Deutsch - 44 seiten

Viessmann Vitotrol 100-EH Bedienungsanleitung - Holländisch - 44 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info