Bedienungsanleitung Viessmann Vitotrol 300-E (Seite 9 von 64) (Englisch)

813829

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Activities that may only be carried out by the con-

tractor are indicated with this symbol.

Work on electrical equipment may only be carried out

by a qualified electrician.

Intended use

Install and operate the Vitotrol 300-E as intended and

only in conjunction with the electronic control units and

controllers of the Viessmann appliances (heat and

power generators and ventilation units) that are sup-

ported for this purpose. No more than 1 Vitotrol 300-E

can be configured for each Viessmann system.

The Vitotrol 300-E must be used only with Viessmann

appliances on which the control units are configured

for a "detached house". If the control unit is configured

for an "Apartment building", the Vitotrol 300-E must

not be used.

The Vitotrol 300-E cannot be operated in conjunction

with a Vitotrol 200-E.

The Vitotrol 300-E is exclusively designed for opera-

tion in buildings of a domestic or commercial nature.

Incorrect use of the device is prohibited and will result

in an exclusion of liability (e.g. commercial or industrial

use other than for control and monitoring purposes).

Installation, service and operating instructions included

with the product and available online must be

observed.

Use the Vitotrol 300-E for system operation with the

user interfaces and communication interfaces exclu-

sively specified for this purpose in the relevant product

documentation. With regard to the communication

interfaces, ensure on site that the system requirements

specified in the product documentation are met at all

times for every communication medium employed, e.g.

that the required WiFi connection between the

Viessmann appliance and a WiFi router is present.

Only use the specified components for the power sup-

ply, e.g. plug-in power supply units.

Note

The device is intended exclusively for domestic or

semi-domestic use, i.e. even users who have not had

any instruction are able to operate the device safely.

Product information

The Vitotrol 300-E is a wireless remote control unit for

Viessmann appliances (heat and power generators

and ventilation units) and is connected to the

Viessmann appliance via "low power radio".

With the Vitotrol 300-E, up to four heating or cooling

circuits and one ventilation unit can be operated. The

Vitotrol 300-E can be used to set room temperatures

and operating programs, or call up fault messages.

Note

No more than 1 Vitotrol 300-E can be configured for

each Viessmann system.

Overview of functions possible, depending on the Viessmann appliance

Possible functions Connected Viessmann appliance, e.g. heat generator

Vitocal Vitodens Vitovalor Vitoair

Operating heating circuits X X X —

Operating cooling circuits X — — —

Operating heating/cooling circuits X — — —

Operating ventilation unit — — — X

Up to date information on the remote control

For a current overview of the supported control units

and updates for the product, e.g. information on com-

missioning: See www.vitotrol.info

Introductory information

Contractor

5839615

Information

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Viessmann Vitotrol 300-E Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Viessmann Vitotrol 300-E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info