Bedienungsanleitung Viessmann VITOTRONIC 200 (Seite 28 von 112) (Englisch)

813781

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

System with heating water/coolant buffer cylinder

A heating water/coolant buffer cylinder can either heat

or cool your heating/cooling circuits.

To heat your home, you must switch on central heating

via the heating water/coolant buffer cylinder. To cool

your home, you must switch on central cooling via the

heating water/coolant buffer cylinder.

Note

■Simultaneous central heating and central cooling is

not possible.

■Central cooling via a separate cooling circuit is not

possible.

Switching on central heating for heating water/

coolant buffer cylinder

1. Extended menu:

2. "System"

3. "Buffer cyl operating mode"

4. "Heating mode"

Switching on central cooling for heating water/

coolant buffer cylinder

1. Extended menu:

2. "System"

3. "Buffer cyl operating mode"

4. "Cooling mode"

Setting the time program for central heating with buffer cylinder

In the time program for central heating with buffer cyl-

inder, you set the time phases in which your buffer cyl-

inder is heated and to what temperatures. In addition,

you specify whether the entire volume of the buffer cyl-

inder or just the top section is heated.

When setting the time program, you select an operat-

ing status for each time phase: See chapter "Operating

status for heating the buffer cylinder".

Note

This time program applies either to a heating water

buffer cylinder or to a heating water/coolant buffer cyl-

inder in heating mode.

Factory setting: One time phase from 00:00 to 24:00 h

for every day of the week with the "Standard" operat-

ing status

■The time phases for heating the buffer cylinder must

cover all time phases for central heating (for all heat-

ing circuits).

■If you switch off heating of the heating water buffer

cylinder with the time program (all time phases are

deleted "- - : - -"), your rooms will not be heated.

■We recommend that the buffer cylinder should be

heated continuously.

1. Extended menu:

2. "System"

3. "Time prog buffer cyl"

4. Set the required time phases and operating status.

To see how to set a time program: See page 23.

Note

■The buffer cylinder is not heated between the time

phases. Only frost protection for the buffer cylinder is

active.

■When setting the time program, please bear in mind

that your heat pump requires some time to heat the

buffer cylinder to the required temperature.

Operating status for heating the buffer cylinder

"Standard"

■The entire volume in the buffer cylinder is heated to

the highest set flow temperature for all connected

heating/cooling circuits.

■The set flow temperature of a heating/cooling circuit

results from the heating curve, the outside tempera-

ture and the required room temperature.

"Reduced"

■The top section of the buffer cylinder is heated to the

highest set flow temperature for all connected heat-

ing/cooling circuits.

■The set flow temperature of a heating/cooling circuit

results from the heating curve, the outside tempera-

ture and the required room temperature.

"Fixd value"

■The entire volume in the buffer cylinder is heated to

a fixed temperature.

Factory setting: 50 °C

Your contractor may have adjusted this value.

■You can utilise the "Fixd value" operating status,

e.g. to heat the buffer cylinder to a higher tempera-

ture with economical night tariff power.

Central heating/central cooling

Central heating/central cooling with buffer… (cont.)

5817913

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Viessmann VITOTRONIC 200 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Viessmann VITOTRONIC 200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info