Bedienungsanleitung Vieta DVD2 (Seite 38 von 47) (Englisch)

30792

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

submenus, the sub items for AUDIO are displayed as shown in the figure below.

1 DIGITAL OUT

DIGITAL OUT item controls the output condition of digital out (coaxial or optical) connector. There

are 3 values possible for DIGITAL OUT. They are OFF, BITSTREAM and PCM. In the case of

OFF value, No digital signal can be output. Only analog audio can be output. In the case of

BITSTREAM value, the original audio stream recorded on the disc is output through the digital out

connector. In the case of PCM value, the decoded audio stream will be output through the digital

out connector. The relation of amplifier and DIGITAL OUT option is shown below.

Amplifier available

Possible DIGITAL OUT values

No Amplifier OFF

Digital Decoder Amplifier (Dolby Digital, dts) OFF, BITSTREAM, PCM (Valid for Dolby Digital)

Stereo or Dolby Prologic Amplifier

OFF, PCM (Valid for Dolby Digital not dts)

2 DOWNMIX (Dolby Digital DVD disc only)

DOWNMIX is used to reproduce the proper analog audio when the audio channel recorded on the

disc differs from the output audio channel configuration. Assume that 5.1 channels audio are

recorded on the disc but you can receive only stereo audio channels. In this case downmix is

unavoidable and you will hear all the channels recorded on disc. There are two ways of

downmixing. One is LT/RT and the other is LO/RO. If you are using Dolby Surround Pro Logic

decoder, please set the downmix mode to LT/RT otherwise LO/RO.

3 DUAL MONOs (Valid for Dolby Digital DVD disc)

DUAL MONOs are two independent mono channels defined in Dolby Digital. DUAL MONO programs

are mainly used for different language versions in one program. This functions in a similar fashion

to TV or VCR supporting secondary audio program. From two MONO channels, STEREO, LEFT

MONO, RIGHT MONO and MIXED MONO may be output in 4 different combinations.

STEREO L channel on L speaker, R channel on R speaker

LEFT MONO L channel on L and R speaker

RIGHT MONO R channel on L and R speaker

MIXED MONO Mix two mono and output mixed mono on both (L, R) speaker

4 DYNAMIC RNG (Valid for Dolby Digital DVD disc)

A consistent problem in the delivery of audio programming is that different members of the audience

desire or even need different amounts of dynamic range depending on the listening situation.

Original high quality programs, such as feature films, are typically mixed with a wide dynamic

range. Using dialogue as a reference, loud sounds like explosions are often 20 dB louder, and

faint sounds like leaves rustling may be 50 dB quieter. In many listening situations, it is

objectionable to allow the sound to become very loud, and the loudest sounds must be

compressed downwards in level. Likewise the very quiet sounds would be inaudible and must be

brought upwards in level to be heard. If you want to hear the original dynamic range recorded on

disc set the DYNAMIC RNG to 0. Otherwise set to 8 then the dynamic range is reduced by

bringing down the level of the loud sounds and bringing up the level of the quiet sounds.

7.2 Video

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vieta DVD2 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Vieta DVD2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info