30844
9
Zoom out
Zoom in
Vorherige Seite
1/15
Nächste Seite
Special Functions
Setting the sound
1 Press MENU to enter SETUP MENU
2 Use / / / to select your preferred option.
3 Press ENTER to confirm a highlighted selection.
4 To exit setup menu, press MENU.
NTSC
- If the connected TV is NTSC system, select this mode. It will
change the video signal of a PAL disc and output in NTSC format.
PAL
- If the connected TV is PAL system, select this mode. It will change
the video signal of a NTSC disc and output in PAL format.
* Video Out
Video out selection enable you to choose the type of video out put
suitable for your receiver.
PR PB Y
- Select PR PB Y, if you have connected the video output to your TV
using S-VIDEO jack.
SCART
- Select SCART, if you have connected the video output to your TV
using the Scart jack.
* Screen Saver
If set to ON, when you leave the system in stop or pause mode for
more than one minute, the screen saver will be activated.
General setup
Setting the picture
* TV Shape
Select the aspect ratio of the TV to be connected.
4:3 PS (default setting)
- If you have a conventional TV set and your DVD is not
formatted for widescreen viewing, use this setting. A wide picture
is displayed on the whole TV screen with a portion
automatically cut off.
4:3 LB
- If you have a conventional TV set and your DVD is formatted for
wide screen viewing, use this setting. Wide bands will be
displayed on the upper and whole portions of the TV screen.
16:9
- If you have a widescreen TV set, use this setting (you must also
set your widescreen TV to “full size”).
16:9
(Wide screen)
4:3 LB
(Letter Box)
4:3 PS
(Pan Scan)
Note
If your DVD is not encoded to allow you to change the aspect
ratio, TV shape cannot be changed.
* TV System
Allows you to select the color system matching the connected
TV set.
AUTO
- If the connected TV is multi system, select this mode. The
output format will be in accordance with the video signal of the
disc.
* Digital Output
Digital output selection enables you to specify the type of digital
output suitable for your amplifier or receiver.
- Select ALL, if you have connected the digital output (COAXIAL or
OPTICAL) to a multichannel decoder receiver.
- Select PCM 96K if the external component is capable of
processing digital signal input with sampling rates of 96 kHz.
- Select PCM 48K if the external component is incapable of
processing 96kHz digital signal input, then convert to standard
signal with sampling rates of 48 kHz.
- Select OFF to deactivate the digital output (COAXIAL or
OPTICAL).
* Night Mode
Set night mode to on to lever out the volume. For example, the disc
will be play at the same sound level throughout the movie. The
default setting is OFF.
- Center Delay
If the listening position is close to the center speaker than the front
speakers, you can set the center delay time to improve the
surround sound effect.
Options: OFF (default setting), 1ms, 2ms, 3ms, 5ms.
- Rear Delay
If the listening position is closer to the rear surround speakers than
the front speakers, you can set the rear delay time to improve the
surround sound effect.
Options: OFF (default setting), 3ms, 6ms, 9ms, 12ms, 15ms.
- Test Tone (Disc mode only)
If set to ON, the system will test the speaker setting. The test signal
is generated through the left, center, right and surround speaker.
The default setting is OFF.
9
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Vieta DVD50 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Vieta DVD50

Vieta DVD50 Bedienungsanleitung - Französisch - 15 seiten

Vieta DVD50 Bedienungsanleitung - Portugiesisch - 15 seiten

Vieta DVD50 Bedienungsanleitung - Spanisch - 15 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info