Bedienungsanleitung Vieta DVD50 (Seite 12 von 15) (Englisch)

30844

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

A-B

Special Functions

This function can play a specific section in a chapter / track repeatly.

Selecting the surround sound

mode

Select from the menu bar and press key repeatedly to

select desire surround sound mode.

- Stereo

All sound is reproduced and played through the left and right

speakers. This enable standard stereo reproduction.

- VSS (Virtual Surround Sound)

The ProLogic MPEG or Dolby Digital surround channel is

processed by a “virtualiser” DSP to add surround effect from

just the two front speakers.

- Dolby ProLogic Surround

The Dolby ProLogic Surround system is a specially encoded

two channel analogue format that will produce sound through

four speaker channels (front left, center, front right, mono

surround) when a Dolby ProLogic Decoder is used. It is also

compatible with stereo systems but the user will stereo system

but the user will only have two channels (front left and right of

sound).

Playback Control (PBC)

1 Select from the menu bar and press key to the

starting portion that you want.

2 Press key again at the end portion that you want. The

specific section will now repeat continuously.

3 Press key the third time to cancel this function.

Note:

The A-B can be set only within the same chapter/track.

Repeat A - B

PBC playback allows you to play Video Cds interactively, following

the menu on the display.

- Select in the menu bar and press key to select PBC

ON or PBC OFF.

When playing a disc with PBC function

- Select in the menu bar and press key to select PBC

ON or PBC OFF.

- If “PBC OFF”, press play key and the system will start playback

automatically.

- If “PBC ON”, the PBC menu (if available) will appear on the TV

screen for selection. Use the number keys (0~9) to enter your

choice.

Note

If PBC mode is switched on, TIME SEARCH and REPEAT functions

are not available.

Program play

You can play the contents of the disc in the order you want by

programming the order of the tracks to be played. Up to 99 tracks

can be stored.

1 Select in the menu bar and press key to enter

program mode.

- is displayed.

2 Use the number keys (0~9) to input the track number in the

order you want.

- If you attempt to program more than 99 tracks, is

displayed.

3 Press OK to store the track.

4 To start program play, press .

5 To stop play back, press once.

6 To cancel the program, press again.

“ ”

STEREO VSS PROLOGIC STEREO ...

Dimming the display screen

Sleep timer setting

The sleep timer enables the system to switch to standby mode

automatically at a present time.

1 Select from the menu bar and press key repeatedly to

select a present time.

- The selections are as follows (time in minutes).

15 30 45 60 90 120 OFF 15...

2 To cancel the sleep timer

- Press key repeatedly until the “OFF” appears.

1 Select from the menu bar and press key to select

different levels of brightness for the display screen: HIGH, MID

or LOW.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vieta DVD50 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Vieta DVD50

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info