596693
43
Zoom out
Zoom in
Vorherige Seite
1/81
Nächste Seite
38
2. Press to highlight 3D Settings and press MODE/ENTER on the projector or
Enter on the remote control.
3. Press to highlight 3D Sync and press MODE/ENTER on the projector or Enter
on the remote control.
4. Press to select a 3D Sync setting according to the table below and then press
MODE/ENTER on the projector or Enter on the remote control to confirm.
For example, if the signal is input from the projector’s S-Video input socket, and its signal
type (resolution) is 480i, then the default 3D Sync setting of the projector is Off, and the
options you can choose for the 3D Sync setting are Off and Frame Sequential.
When the 3D Sync function is on:
The brightness level of the projected image will decrease.
The Color Mode cannot be adjusted.
The Keystone can only be adjusted within limited degrees.
The Zoom can only magnify the pictures to limited sizes.
If you discover the inversion of the 3D image depth, set the 3D Sync Invert function to “Invert”
to correct the problem.
Using the projector in standby mode
Some of the projector functions are available in standby mode (plugged in but not turned
on). To use these functions, be sure you have turned on the corresponding menus under
SYSTEM SETTING: BASIC > Standby Settings, and the cable connections are correctly
made. For the connection methods, see the Connection chapter.
Power Saving
Less than 0.5W power consumption when Power Saving mode is turned on.
Active VGA Out
Selecting On outputs a VGA signal when the COMPUTER IN 1 and COMPUTER OUT
sockets are correctly connected to devices. The projector outputs the signal received only
from COMPUTER IN 1.
Input signal type (resolution) Default setting 3D Sync options available
HDMI (PC) and DVI-D 120Hz
signals (SVGA 120Hz, XGA 120Hz,
WXGA 120Hz, 1280x720 120Hz)
Frame Sequential Off, Frame Sequential
HDMI (PC) and DVI-D 60Hz signals
(up to 1920x1200 60Hz)
Off
Off, Frame Sequential,
Frame Packing, Top-
Bottom, Side-by-Side
Video, S-Video signals (HQFs) and
Component video, HDMI signals
(NTSC 480i)
Off Off, Frame Sequential
Component video, HDMI signals
(480p, 720p, 1080p, 1080i) without
3D information frame
120Hz: Off
60Hz: Off
120Hz:Off, Frame
Sequential
60Hz: Off, Frame
Sequential, Frame Packing,
Top-Bottom, Side-by-Side
HDMI 1.4a signals (720p, 1080i,
1080p) with 3D information frame
Auto
Auto, Off, Frame
Sequential, Frame Packing,
Top-Bottom, Side-by-Side
43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Viewsonic PJD5533w wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Viewsonic PJD5533w

Viewsonic PJD5533w Bedienungsanleitung - Deutsch - 80 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info