Bedienungsanleitung Viewsonic PJD6223 (Seite 43 von 89) (Englisch)

484486

Zoom out

Zoom in

Vorherige Seite

1/89

Nächste Seite

To activate the High Altitude Mode:

1. Press MENU/EXIT on the projector or Menu on

the remote control and then press / until the

SYSTEM SETUP: Advanced menu is

highlighted.

2. Press to highlight High Altitude Mode and

press / to select On. A confirmation

message is displayed.

3. Highlight Yes and press MODE/ENTER on the projector or Enter on the remote

control.

Operation under "High Altitude Mode" may cause a higher decibel operating noise level

because of increased fan speed necessary to improve overall system cooling and

performance.

If you use this projector under other extreme conditions excluding the above, it may display

auto shut-down symptoms, which is designed to protect your projector from over-heating.

In cases like this, you should switch to High Altitude Mode to solve these symptoms.

However, this is not to state that this projector can operate under any and all harsh or

extreme conditions.

Creating your own startup screen

This function is only available for the PJD6223/PJD6253/PJD6353/PJD6353s/PJD6383/PJD6383s/

PJD6653w/PJD6653ws series.

In addition to selecting the projector preset startup screen from among ViewSonic logo,

Black or Blue screen, you can make your own startup screen that is a picture projected from

your computer or video source.

To create your own startup screen, project the picture you want to use as your startup screen

from either a computer or video source. The rest of the steps are as follows.

1. Press MENU/EXIT on the projector or Menu on the remote control and then press

/ until the SYSTEM SETUP: Basic menu is highlighted.

2. Press to highlight Screen Capture and press MODE/ENTER on the projector or

Enter on the remote control.

3. A confirmation message is displayed. Press MODE/ENTER on the projector or

Enter on the remote control again.

4. The message 'Screen Capturing...' is displayed while the projector is processing the

picture. Please wait.

5. If the action is successful, you see the message 'Capture Succeeded' on the screen.

The captured picture is saved as Screen Capture and the captured picture will be

displayed as the startup screen if you restart the projector.

In the unlikely event that the capturing action fails, change your target picture. When the

resolution of the input signal is higher than the projector’s native display resolution (See

"Projector specifications" on page 64 for details.), the capture action may fail. When it

happens, please set the resolution of the input signal under native resolution and try again.

We recommend you use the High Altitude

mode by selecting it whenever your

environment is higher than 1500 m.

Do you want to turn High Altitude Mode

ON?

Yes

Notice

PJD6553w/ /PJD6683w/PJD6683ws

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Viewsonic PJD6223 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Viewsonic PJD6223

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info