Bedienungsanleitung Viewsonic PJD6553w (Seite 38 von 89) (Englisch)

484492

Zoom out

Zoom in

Vorherige Seite

1/89

Nächste Seite

3. ViewMatch mode: Switches between high brightness performance and accurate color

performance.

4. Movie mode: Is suitable for enjoying dark movies or DVD movies best viewed in a

blackened (little light) home cinema or lounge room environment.

5. Dynamic Movie mode: Is suitable for enjoying dark movies or DVD movies best

viewed in a blackened (little light) home cinema or lounge room environment. In

addition, the projector will optimize the image quality using the dynamic Movie

function in accordance with the projected contents.

It takes some time to initiate this function. Make sure the projector has been turned on for

more than 4 minutes.

If the projector is resumed by using the Smart Restart feature, this function can be executed

immediately.

6. User 1/User 2 mode: Recalls the settings customized based on the current available

picture modes. See "Setting the User 1/User 2 mode" on page 33 for details.

Setting the User 1/User 2 mode

There are two user-definable modes if the current available picture modes are not suitable

for your need. You can use one of the picture modes (except the User 1/User 2) as a starting

point and customize the settings.

1. Press MENU/EXIT on the projector or Menu on the remote control to open the On-

Screen Display (OSD) menu.

2. Go to the PICTURE > Color Mode menu.

3. Press / to select User 1 or User 2.

4. Press to highlight Reference Mode.

This function is only available when User 1 or User 2 mode is selected up in the Color Mode

sub-menu item.

5. Press / to select a picture mode that is closest to your need.

6. Press to select a sub-menu item to be changed and adjust the value with / .

See Fine-tuning the image quality in user modes below for details.

7. When all settings have been done, highlight Save Settings and press MODE/ENTER

on the projector or Enter on the remote control to store the settings.

8. The confirmation message 'Setting Saved' is displayed.

Using Screen Color

In the situation where you are projecting onto a colored surface such as a painted wall which

may not be white, the Screen Color feature can help correct the projected picture’s colors to

prevent possible color difference between the source and projected pictures.

To use this function, go to the DISPLAY > Screen Color menu and press / to select a

color which is closest to the color of the projection surface. There are several precalibrated

colors to choose from: Whiteboard, Greenboard, and Blackboard.

This function is only available when a PC type input signal is selected.

Fine-tuning the image quality in user modes

According to the detected signal type, there are some user-definable functions available

when User 1 or User 2 mode is selected. You can make adjustments to these functions

based on your needs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Viewsonic PJD6553w Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Viewsonic PJD6553w

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info