Bedienungsanleitung Viewsonic PJL7202 (Seite 11 von 73) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

484541

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

Safety Instructions

ViewSonic 4 PJL7200/PJL7201/PJL7202

Safety Instructions

The projector is designed and tested to meet the latest standards for safety of information technology

equipment. However, to ensure safe use of this product, it is important that you follow the

instructions mentioned in this manual and marked on the product.

WARNING / CAUTION

1. If a problem occurs

- If smoke or strange odors arise, continued use

couldresultinreorelectricalshock.

- If there is no image or sound, or the sound

is distorted in the projector. In some cases,

immediately remove the power cable from the

power outlet. After making sure that the unit has

stopped, contact your dealer for repairs.

Never attempt to repair by yourself because this

is dangerous.

2. Do....

- Place the projector in a stable horizontal

position.

- Put the projector in a cool place, and ensure that

thereissufcientventilation.

- To consult with your dealer before a special

installation such as suspending from a ceiling.

3. Do not....

- Do not place the projector on an unstable,

slanted or vibrating surface such as a wobbly or

inclined stand.

- Do not cover the projector's vents. Keep a space

of 20 cm or more between the projector and

other objects such as walls.

-Do not place the projector on metallic goods.

- Do not place the projector on carpet, cushions

or bedding. Do not place the projector in direct

sunlight or near hot objects such as heaters.

- Do not place anything near the projector lens or

vents, or on top of the projector.

- Do not place anything that may be sucked into

or stick to the vents beside of the projector.

- Do not use this projector if there is no image or

sound, or if the sound is distorted.

- Do not place this projector in a container

containing liquid.

4. While connecting, make sure that the shape

ofthecable’sconnectortstheportto

connect with. Be sure to tighten the screws

on connectors with screws.

5. Do not disassemble or modify the projector

and accessories.

6. Be careful not to damage the cables, and do

not use damaged cables.

7. Use appropriate accessories or otherwise

designed cables. Ask your dealer about non-

accessory cables that may have other lengths.

8. Make sure that devices are connected to the

correct ports. An incorrect connection may

result in malfunction or damage to the device

and the projector.

9. Do not look through the lens when the lamp

is on.

Do not look through the lens when the lamp is

on. The powerful light could adversely affect

vision. Use special caution in households where

children are present.

10. A strong light is emitted when the projector’

s power on. Do not look into the lens of the

projector or look inside of the projector.

Do not place the projector upon either

side to project an image.

NO SIDEWARD

Do not point the projector down to

project an image.

NO DOWNWARD

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Viewsonic PJL7202 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info