Bedienungsanleitung Viking MB 248T (Seite 37 von 269) (Alle Sprachen)

667223

Zoom out

Zoom in

Vorherige Seite

1/269

Nächste Seite

DEFRNLITESPTNOSVFIDASKCSEL EN

0478 111 9922 B - EN

7.2 Assembling the handlebar

● Insert flat head bolt (E) through cable

guide (F).

● Attach cable guide (F) to motorstop

cable (2).

● MB248T, MB253T:

Also attach cable guide (F) to self-

propulsion cable (3).

● Fit upper handlebar (1) onto the outside

of lower handlebar sections (4) as

shown.

● Insert flat head bolts (E) – on left with

cable guide (F), on right without –

through bores from the inside and

tighten with rotary handles (D).

7.3 Attaching and detaching the

recoil starter rope

Attaching:

● Detach the spark plug socket from the

engine.

● Press the motorstop lever (1) to the

handlebar and hold.

● Slowly pull out the recoil starter rope (2)

and attach it to the rope holder (3).

● Slowly release the recoil starter rope (2)

and motorstop lever (1).

● Connect the spark plug socket.

Detaching:

● Detach the spark plug socket from the

engine.

● Press the motorstop lever (1) to the

handlebar and hold.

● Slowly pull out the recoil starter rope (2)

and detach it from the rope guide (3).

● Slowly return the recoil starter rope (2)

and release the motorstop lever (1).

● Connect the spark plug socket.

7.4 Folding down the upper

handlebar

The upper handlebar (1) can be

folded down for space-saving transport

and storage of the mower.

● Detach the recoil starter rope. (Ö 7.3)

● Release the rotary handle (3) on each

side (by turning anti-clockwise).

● Slowly fold the upper handlebar (1)

forwards.

7.5 Assembling grass catcher

box

● Fit upper part of grass catcher

box (B) onto lower part of grass catcher

box (C).

● Check for correct seating:

The tabs (1) must be located exactly

over the openings (2).

All tabs (1) and guide lugs (3) must be

located on the inside.

The upper part of the grass catcher box

(B) must completely surround the lower

part of the grass catcher box (C) on the

outside.

● Starting from the rear centre, press tabs

(1) into openings (2) in the lower part of

the grass catcher box from the outside,

using slight pressure.

7.6 Removing and attaching the

grass catcher box

Attaching:

● Open the discharge flap (1) and hold it

open.

● Attach grass catcher box (2) to

mountings (4) on rear of machine by

means of locating lugs (3).

Ensure that flap (5) is properly closed.

● Release the discharge flap (1).

Detaching:

● Open the discharge flap (1) and hold it

open.

Danger of pinching!

Hold the upper handlebar (1) with

one hand at its highest point when

screwing in the two rotary

handles (D).

Risk of injury!

Stop the engine before folding

down the upper handlebar and

detach the spark plug socket.

No additional loads must be placed

on the upper handlebar (1) (e.g.

hanging work clothing over the

upper handlebar).

Danger of pinching!

The upper handlebar (1) can fold

down on its own when the two

rotary handles (3) are released.

Therefore hold the upper

handlebar (1) at its highest point

before releasing the two rotary

handles (3).

Risk of injury!

The engine must be stopped

before attaching or removing the

grass catcher box.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Viking MB 248T Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info