Bedienungsanleitung Viking MB 6RV (Seite 39 von 544) (Alle Sprachen)

667340

Zoom out

Zoom in

Vorherige Seite

1/544

Nächste Seite

0478 111 9917 F - EN

PTNOSV

PLSL

HR DEEN

NLITES

Only carry out maintenance

work which is described in the

instruction manual. All other

work should be carried out by

a specialist dealer.

VIKING recommends that you

have maintenance operations

and repairs performed by a VI-

KING specialist dealer.

VIKING recommends the use

of original VIKING tools, ac-

cessories and spare parts.

Their properties are optimally

adapted to the appliance and

the user’s requirements. When

replacing the cutting tool, en-

sure that the correct type of

cutting tool is installed.

- Ensure that all nuts, pins

and bolts are securely

tightened, so that the appli-

ance is in a safe operating

condition.

- If the cutting tool or the ap-

pliance hits an obstacle or a

foreign object, the appliance

must be switched off. In this

case, an inspection must be

performed by a specialist

dealer.

- In the interests of safety, re-

place all worn or damaged

parts. This is particularly im-

portant for the apron.

- Replace danger signs and

warnings on the appliance

which have become illegi-

ble. Your VIKING specialist

has a stock of replacement

stickers.

Warning – petrol is poiso-

nous and extremely inflam-

mable

- Petrol must only be stored

in appropriate containers.

- Keep petrol away from

sparks, naked fla-

mes, pilot lights,

heat sources, and

other ignition sources.

- Only transport the machine

with an empty fuel tank.

- Re-fill the tank out of doors

and do not smoke during re-

filling.

- To give the fuel room to ex-

pand, never fill the fuel tank

past the lower edge of the

filler neck.

Observe the additional in-

structions in the engine in-

struction manual.

- If the blade has hit a fo-

reign object. The cutting

tool and the appliance

need to be checked for

possible damage. Make

any necessary repairs

before restarting and

using the appliance (spe-

cialist dealer).

- Before checking,

cleaning or working on

the appliance.

- If the appliance begins to

vibrate excessively; it

must be checked imme-

diately.

- When you leave the ap-

pliance unattended.

- Before re-filling the tank.

- In order to prevent fire ha-

zards, keep the engine

(cooling ribs) and exhaust

as well as petrol tank free

from grass, leaves or oil.

- Beware of the cutting tool

running on for several

seconds before co-

ming to a standstill.

- For safety reasons, the ap-

pliance must not be used on

slopes with an incline of

more than 25° (46.6 %). It is

only permitted to work

across the direction of the

gradient and never up or

down the slope, in order to

prevent loss of control of the

lawn mower.

Risk of injury!

A slope inclination of 25°

corresponds to a vertical

height increase of 46.6 cm

for a 100 cm horizontal sur-

face.

In order to ensure an ade-

quate oil supply for the en-

gine, the information in the

accompanying engine in-

struction manual must be

additionally observed when

using the machine on slo-

pes.

Maintenance and repairs

Detach the spark

plug socket before

performing any work

on the appliance.

max. 25°

100

46.6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Viking MB 6RV Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Viking MB 6RV

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info