Bedienungsanleitung Viking ME 443 (Seite 45 von 250) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch)

667214

Zoom out

Zoom in

Vorherige Seite

1/250

Nächste Seite

DEFRNLITESPTNOSVDAELRU EN

0478 121 9920 D - EN

12.8 Storage (winter break)

Store the machine in a dry and locked

place that is generally free of dust. Make

sure that it is kept out of the reach of

children.

Only store the lawn mower in good

operating condition, fold down the

handlebar if necessary.

Keep all nuts, pins and bolts tightly

fastened, replace danger signs and

warnings on the machine that have

become illegible, check the entire machine

for wear and damage. Replace all worn or

damaged parts.

Any machine faults must be completely

remedied prior to storage.

Note the following points when storing the

lawn mower for long periods (winter

break):

● Clean all external parts of the machine

with care.

● Thoroughly lubricate/grease all moving

parts.

13.1 Transport

Carrying the machine:

● Two persons:

Only hold the machine at the front

handle (1) and at the handlebar (3).

Always ensure sufficient distance

between the mowing blade and your

body, particularly your feet and legs.

● One person:

Lift and carry the machine using both

hands, with one hand at the upper

transport handle (2) and the other hand

at the lower transport handle (1).

Securing the machine (lashing):

● Secure the machine on the load floor

using suitable fastening materials.

● Attach ropes or straps at the points

marked (4).

Important information on maintenance

and care of the product group

lawn mower, manually-operated and

mains-powered (ME)

VIKING assumes no liability for material or

personal damage caused by the non-

observance of information contained in the

operating instructions, in particular with

regard to safety, operation and

maintenance, or which arise through the

use of unauthorised attachment or spare

parts.

Please always observe the following

important information for the prevention of

damage or excessive wear to your VIKING

machine:

1. Wearing parts

Some parts of the VIKING machine are

subject to normal wear even when used

properly and must be replaced in due time

depending on type and duration of use.

These include:

–blades

2. Compliance with the information in

this instruction manual

The VIKING machine must be used,

maintained and stored with the care

described in this instruction manual. Any

damage caused by non-compliance with

the safety, operating and maintenance

instructions is the sole responsibility of the

user.

This applies in particular to:

– inadequately dimensioned power

cables (cross section),

13. Transport

Risk of injury!

Observe the section "For your

safety" before transporting. (Ö 4.)

Always wear suitable safety

clothing when transporting (safety

shoes, thick gloves).

Always disconnect the power cable

before lifting or transporting. For

safety reasons, VIKING

recommends lifting or carrying the

machine only with the aid of a

second person.

Before lifting, note the weight

indicated in the "Technical

specifications" section.

14. Minimising wear and

preventing damage

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Viking ME 443 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info