Bedienungsanleitung Viking MT 4097SX (Seite 29 von 332) (Englisch, Dänisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

667328

Zoom out

Zoom in

Vorherige Seite

1/332

Nächste Seite

ENNO

SVFIDAPL

0478 192 9803 B - EN

11.7 Mowing

The following points must be noted

before engaging the mowing blade:

– No persons, particularly children or

animals must be in the vicinity.

– Carefully inspect the complete area on

which the machine is to be used and

remove all stones, sticks, wire, bones

and other foreign objects.

– Before engaging the mowing deck,

visually inspect to determine whether

the safety devices (V-belt covers,

deflector flap etc.) are properly installed

and are in good condition.

– Only engage the mowing blades at the

maximum engine speed.

– Only engage the mowing blades when

the machine is already on the grass

area to be mown.

– Do not engage the mowing blades in tall

grass or when set to the lowest cutting

level.

Engage the mowing blade in the

following sequence:

● Start the engine. (Ö 11.2)

● Drive the machine onto the lawn.

● Do not engage the mowing deck in tall

grass or when set to the lowest cutting

level. (Ö 8.12)

● Press the mowing deck switch to

engage the mowing deck. (Ö 8.5)

During mowing:

● Always set the throttle lever to the MAX

position when mowing. (Ö 8.2), (Ö 8.3)

● Always adapt the driving speed to the

grass height/cutting level when

mowing.

A low driving speed should be selected

when mowing tall grass / at a low cutting

level. (Ö 8.9)

Disengage the mowing blade in the

following sequence:

● Drive onto an area of grass which has

already been mown or select the

highest mowing deck cutting level.

(Ö 8.12)

● Press the mowing deck button to

disengage the mowing deck. (Ö 8.5)

11.8 Pulling loads

Maximum trailer weight on a level

surface = 250 kg

Maximum trailer weight on a maximum 10°

inclination = 100 kg

Always set the maximum engine

speed for mowing. The mowing

blades are optimised for this speed

and this produces the best cutting

pattern as well as the best cutting

performance.

If the mowing deck is engaged

when driving, the engine speed is

briefly reduced due to the additional

load as the mowing blades start to

rotate. The engine then continues

to run at the selected engine speed.

Should the discharge opening

become blocked or if the engine

speed is reduced during a mowing

operation, a lower driving speed or

a higher cutting level should be

selected.

In order to maintain a well-cut lawn,

the section "Notes on mowing"

should be read and observed

before mowing. (Ö 9.)

Risk of injury:

After disengaging the mowing deck,

beware of the mowing blade

running on for several seconds

before coming to a standstill (max.

5 seconds).

Risk of injury:

Before attaching loads, always

check the braking function.

(Ö 8.10)

The driving characteristics of the

machine are changed when

transporting loads (longer braking

distances, select lower driving

speed when changing direction

etc.). The heavier the load, the

more the driving characteristics are

changed.

Avoid damage to the machine.

The maximum pulled load is

decreased on inclines.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Viking MT 4097SX Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Viking MT 4097SX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info