Bedienungsanleitung Visonic PowerMax Express (Seite 2 von 36) (Englisch)

580333

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

2 D-302989

7. READING THE EVENT LOG .................................. 29

APPENDIX A. Detector Deployment & Transmitter

Assignments ................................................................ 30

A1. Detector Deployment Plan.................................. 30

A2. Keyfob Transmitter List....................................... 30

A3. Emergency Transmitter List................................31

A4. Non-Alarm Transmitter List................................. 31

APPENDIX B. Event Codes ........................................ 31

Contact ID Event Codes ......................................... 31

SIA Event Codes..................................................... 31

4/2 Event Codes...................................................... 31

Understanding the Scancom Reporting Protocol Data

Format..................................................................... 33

APPENDIX C. Programmable Zone Types .................33

C1. Delay Zones....................................................... 33

C2. Emergency Zones.............................................. 33

C3. Fire Zones ........................................................ 33

C4. Flood Zone ....................................................... 33

C5. Gas Zone.......................................................... 33

C6. Interior Zone ..................................................... 33

C7. Interior Follower Zones .................................... 33

C8. Home/Delay Zones .......................................... 33

C9. Non-Alarm Zones ............................................. 33

C10. Perimeter Zones............................................. 33

C11. Perimeter Follower Zones.............................. 33

C12. Temperature Zone ......................................... 33

C13. 24-Hour Zones ............................................... 33

C14. Key Zones (Optional) ..................................... 34

APPENDIX D. PowerMaxExpress Compatible Devices

..................................................................................... 34

D1. PowerMaxExpress Compatible Detectors ........ 34

D2. PowerMaxExpress Compatible Transmitters... 34

D3. PowerMaxExpress Compatible WL Siren........ 35

D4. PowerMaxExpress Compatible WL Repeater . 35

MESSAGE TO THE INSTALLER

The PowerMaxExpress control panel is supplied with 2 instruction manuals:

 Installer Guide (this manual - for your exclusive use)

 User’s Guide (for your use during installation only - Must be handed over to the master user after testing the system).

Appendices A.1 and A.2 will help you prepare an installation plan. Please take time to fill out the forms - your job will

become much easier and confusion will be prevented. Filling out the forms will also help you create a list of detectors and

transmitters that must be obtained for the particular application. Compatible detectors and transmitters are listed and

described briefly in Appendix D.

Remember - it is advisable to power up the control panel temporarily after unpacking and program it on the work bench, in

accordance with the installation plan.

The programming flow charts in the programming section show all options available for each parameter. Factory defaults

are marked with a dark box to their right, and other options (that can be selected instead) are marked by clear boxes. This

method allows you to put a checkmark in the appropriate clear box whenever you deviate from the factory defaults.

Most of the programming section paragraph numbers correlate with the programming menu numbers. For example,

paragraph 4.4.19 describes the "Jam detect", that exists in menu 4 (define panel), sub-menu 19 (Jam detect).

Although setting the correct time and date is one of the user tasks, we recommend that you set the time and date in the

course of programming. Access to the “User Settings” for the installer is possible through item 10 on the installer‘s menu or

through the user menu (see User’s manual section 7).

After programming, proceed to install the system as detailed in the Installation Instructions, from paragraph 3.4 onward.

The installer should verify line seizure. Be aware of other phone line services such as DSL. If DSL service is present

on the phone line, you must install a filter. It is suggested to use the DSL alarm filter model Z-A431PJ31X

manufactured by Excelsus Technologies, or equivalent. This filter simply plugs into the RJ-31X jack and allows alarm

reporting without breaking the internet connection. If the user has a Voice over IP phone system only, the control

panel will not be able to communicate with the central station via the PSTN telephone line. In this case, the user will

either need to install an additional telephone line, or connect a GSM module.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Visonic PowerMax Express Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Visonic PowerMax Express

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info