Bedienungsanleitung Visonic PowerMax Express (Seite 9 von 36) (Englisch)

580333

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

D-302989 9

4. PROGRAMMING

4.1 INTRODUCTION

4.1.1 General Guidance

We recommend to program the PowerMaxExpress on the

work bench before actual installation. Operating power

may be obtained from the backup battery or from the AC

power supply.

The installer’s menu is accessible only to those who know

the installer’s 4-digit code, which is 9999 by factory default.

Note: Access to the installer menu, in PowerMaxExpress

that has "User Permission" enabled (for example in UK) is

accessible only at the end of the user menu. This option

can be changed if necessary (see par. 4.4.36).

For PowerMaxExpress that has 2 installer codes (not

applicable in UK), the default INSTALLER code is 8888

and the default MASTER INSTALLER code is 9999.

The following actions can be done only by using the

master installer code:

• Changing master installer code.

• Resetting the PowerMaxExpress parameters to the

default parameters,

• Defining specific communication parameters, as

detailed in a note in figure 4.5C.

Obviously, you are expected to use this code only once for

gaining initial access, and replace it with a secret code

known only to yourself.

You will mainly use 5 control pushbuttons during the entire

programming process:

- to move one step forward in a menu.

- to move one step backward in a menu.

OKI

to enter the relevant menu or confirm data.

- to move one level up in a menu.

- to return to the "OK TO EXIT" state.

The sounds you will hear while programming are:

- Single beep, heard whenever a key is pressed.

- Double beep, indicates automatic return to the

normal operating mode (by timeout).

☺

- Happy Melody (- - - –––), indicates successful

completion of an operation.



- Sad Melody (–––––), indicates a wrong move

or rejection.

4.1.2 Entering an Invalid Installer Code

If you enter an invalid installer code 5 times, the keypad

will be automatically disabled for 90 seconds and the

message WRONG PASSWORD will be displayed.

4.1.3 Installer’s Menu

The installer's menu is shown in figure 4.1a. The text in

rectangles represents the current PowerMaxExpress

display.

4.1.4 Setting a New Installer Code

To set an installer code, perform the actions that are

presented in figure 4.1b. When you are instructed to enter

code, enter a 4-digit code.

4.1.5 Setting a New Installer Code in

PowerMaxExpress that has 2

Installer Codes

For PowerMaxExpress with 2 installer codes, INSTALLER

code (default 8888) and MASTER INSTALLER code

(default 9999), set new codes as shown in figure 4.1c.

For details regarding the different authorization levels

when logging in with installer code and master installer

code, refer to the note inside figure 4.5C (DEFINE

COMM).

By using the master installer code, the menu enables

changing both master installer code and installer code.

By using the installer code, the menu enables changing

the installer code only.

(See figure 4.9)

(See figure 4.3)

(See figure 4.4)

(See figure 4.5)

(See chapter 7

in User Guide)

(See figure 4.2)

14. START UL/DL

13. SERIAL NUMBER

12. FACTORY DEFLT

11. USER SETTINGS

10. DIAGNOSTICS

9. DEFINE CUSTOM

5. DEFINE COMM.

4. DEFINE PANEL

3. DEFINE ZONES

2. ENROLLING

1. NEW INSTL CODE

ENTER CODE

INSTALLER MODE

USER SETTING

WALK TEST

READY 00:00

[installer code]

(First display)

(See figure 4.10)

(See fig. 4.1b & 4.1c)

(See par. 4.12)

(Control Panel

serial number

display)

<OK> TO EXIT

(See section 4.14)

(*)

(*) Applicable only when "USER PERMIT" function is enabled

(see par. 4.4.36 - USER PERMIT)

Figure 4.1a - Installer’s Menu

(See fig. 4.1a)

1. NEW INSTL CODE

NEW INST. CODE

INST. CODE xxxx

[code]

Figure 4.1b - Setting a New Installer Code (see note)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Visonic PowerMax Express Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Visonic PowerMax Express

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info