Bedienungsanleitung Visonic PowerMax Express (Seite 20 von 36) (Englisch)

580333

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

20 D-302989

Receiver 2 Account No. [Fig 4.5.3(7)] - see note in Fig.

4.5 Detail C

Here you enter the number that will identify your system to

the 2

central station. The account number consists of 6

hexadecimal digits.

PSTN/GSM RCVR1 [Fig 4.5.3(8)] - see note in Fig. 4.5

Detail C

Here you program telephone number of the 1

central station

(including area code, 16 digit max) to which the system will

report the event groups defined in Report Events.

PSTN/GSM RCVR2 [Fig 4.5.3(9)] - see note in Fig. 4.5

Detail C

Here you program telephone number of the 2

central station

(including area code, 16 digit max) to which the system will

report the event groups defined in Report Events.

IP RCVR 1 [Fig 4.5.3(10)]

Here you enter the IP address of the IP receiver that is

located in the 1

central station.

IP RCVR 2 [Fig 4.5.3(11)]

Here you enter the IP address of the IP receiver that is

located in the 2

central station.

SMS RCVR 1 [Fig 4.5.3(12)]

Here you enter the telephone number of the SMS receiver

that is located in the 1

central station.

SMS RCVR 2 [Fig 4.5.3(13)]

Here you enter the telephone number of the SMS receiver

that is located in the 2

central station.

PSTN Report Format [Fig 4.5.3(14)] - see note in Fig.

4.5 Detail C

Here you select the reporting format used by the control

panel to report events to central stations.

The options are:  SIA text  Contact-ID  SIA  4/2

1900/1400  4/2 1800/2300  Scancom (see Appendix B

- code lists).

4/2 Pulse Rate [Fig 4.5.3(15)] - see note in Fig. 4.5 Detail

Here you select the pulse rate at which data will be sent to

central stations if any one of the 4/2 formats has been

selected in PSTN Report Format.

The options are: 10, 20, 33 and 40 pps.

PSTN Report Retry [Fig 4.5.3(16)] - see note in Fig. 4.5

Detail C

Here you determine the number of times the communicator

will dial the central station’s number via PSTN.

The options are: 2, 4, 8, 12 and 16 attempts.

Note: To comply with UL requirements, the unit shall make

no less than five attempts and no more than ten attempts

to contact the central station.

GSM Report Retry [Fig 4.5.3(17)] - see note in Fig. 4.5

Detail C

Here you determine the number of times the communicator

will try to report via a cellular group (GPRS, GSM and

SMS) to the central station.

The options are: 2, 4, 8, 12 and 16 attempts.

Lan Report Retry [Fig 4.5.3(18)] - see note in Fig. 4.5

Detail C

Here you determine the number of times the communicator

will try to report via the Broadband Module communication

to the central station.

The options are: 2, 4, 8, 12 and 16 attempts.

Auto Test Time [Fig 4.5.3(19)]

Here you determine the time at which the telephone line will

be tested and reported to the central station.

Auto Test Cycle [Fig 4.5.3(20)]

Here you determine the time interval between consecutive

telephone line test messages sent to the central station.

The control panel performs this at regular intervals to verify

proper communications.

The options are: test every 5 hours, test every 1, 2, 5, 7, 14,

30 days and test OFF.

Line Fail Report [Fig 4.5.3(21)]

PSTN [Fig 4.5.3(21a)]

Here you determine if the PSTN telephone line

disconnection will be reported or not and determine the

delay between detection of line disconnection and the

failure reporting. If the telephone line is disconnected, the

event "tel line fail" will be stored in the event log.

The options are: don't report, immediately, 5 minutes,

30 minutes, 60 minutes or 180 minutes.

Note: To comply with EN requirements, "immediately"

must be selected.

GSM/GPRS [Fig 4.5.3(21b)]

Here you determine if the GSM/GPRS line disconnection

will be reported or not and determine the delay between

detection of line disconnection and report failure. If the

telephone line is disconnected, the event "GSM line fail"

will be stored in the event log.

The options are: don't report, 2 minutes, 5 minutes, 15

minutes, or 30 minutes.

Broadband [Fig 4.5.3(21c)]

Here you determine if the Broadband Module line

disconnection will be reported or not and determine the

delay between detection of line disconnection and report

failure. If the telephone line is disconnected, the event

"BBA line fail" will be stored in the event log.

The options are: don't report, 2 minutes, 5 minutes, 15

minutes, or 30 minutes

PSTN Up / Down [Fig 4.5.3(22)]

Remote Access [Fig 4.5.3(22a)]

Here you give or deny permission to access the system

and exercise control from a remote telephone.

The options are: rem. access ON and rem. access OFF.

Mast. Downl Code [Fig 4.5.3(22b)]

Here you determine the master installer 4-digit password for

downloading/uploading data into/from the PowerMaxExpress

memory.

Attention! If "0000" is used, it will not enable connection of

the PowerMaxExpress to the PC for upload/download

purpose.

Inst. Downl Code [Fig 4.5.3(22c)]

Here you determine the installer 4-digit password for

downloading data into the PowerMaxExpress memory.

Attention! If "0000" is used, it will not enable

connection of the PowerMaxExpress to the PC for

upload/download purpose.

Upload Option [Fig 4.5.3(22d)]

Here you determine whether the PowerMaxExpress data can

be uploaded into a computer while the system is in disarm

state or at any time (in HOME/AWAY arming & disarm state).

The options are: when system OFF and

any time

Up Download Tel# [Fig 4.5.3(22e)]

Here you enter the telephone number (up to 16 digits) of the

UL/DL server.

Note: Only for use with control panels monitored by

compatible central stations. Leave empty if not used.

Visonic PowerMax Express Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Visonic PowerMax Express

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info