Bedienungsanleitung Vitamix A3300 (Seite 6 von 16) (Englisch, Französisch)

653454

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

bl en d I n g

1. The On/O switch is on the right hand side of the base. Press the On/O switch to the On (I) position. After the blender is turned on, “Vitamix”

will appear on the control panel. This symbol will be displayed on the control panel when no container is on the blender base.

2. Load your container according to your recipe or the load order in the illustration here. Note: Recipe ingredients for cups load in the opposite

order of the large containers.

Loading Large Containers

Liquids

Dry Goods

Leafy Greens

Fruits & Veggies

Ice & Frozen

Ingredients

IMPORTANT! Always use the lid and the lid plug on the Large Container when the machine is in operation.

Never operate the blender without checking to make sure that the lid and lid plug are securely locked in place.

3. Perform one of the following:

Loading the 20 ounce Cup

Liquids

Dry Goods

Leafy Greens

Fruits & Veggies

Ice & Frozen

Ingredients

Before putting the blade base

onto the cup, locate the two

arrows on the blade base.

Tighten the blade base onto

the cup until the arrows line

up within the range marked

on the cup.

• Large Containers - Put the lid onto the container. Push the lid down into place until

the two tabs snap onto the lip of the container. Insert the lid plug. Turn the lid plug

clockwise to lock.

• Cups - Put a seal on the bottom thread of the adapter. The seal should ﬁt snugly and

evenly around the thread. Thread the adapter onto the cup in a clockwise direction

just until tight. DO NOT overtighten or leaking can occur.

4. Put the container (or cup and adapter) onto the base. Variable Speed 1 will display

when a container/cup is detected and the blender is ready to operate.

5. Perform one of the following:

• To use variable speed:

a. Turn the variable speed dial counter-clockwise until Variable Speed 1 appears on the

control panel.

b. Press Start/Stop. The blades will begin to turn and the timer will count the

minutes and seconds that the blend has been processing. To set a blend time,

use the +/- icons on the controls.

c. Rotate the Variable Speed Dial between 1 and 10 during the blending cycle to

increase or decrease the speed of the blades.

d. At the end of the blend, rotate the Variable Speed Dial counter-clockwise until

Variable 1 is displayed and press Start/Stop.

• To use Programs:

Note: The soup program is not available for use with the cups. DO NOT blend hot liquid

in the cups.

a. Press the icon for the desired program. (The default program time and variable speed

setting will display on the control panel).

b. Press Start/Stop to start the program. (The blender will automatically stop at the end of

the program.) Press Start/Stop at any time to stop the program.

6. If the mixture stops circulating:

• Large Containers - Insert the tamper through the lid plug and stir until it ‘burps’. If this does

not work, press the On/O switch to stop the motor. Remove the container from the

blender base and use a rubber spatula to press the air bubble away from the blades. Add

liquid if necessary. Replace the lid and lid plug. Return the container to the blender base and

continue blending.

• Cups - Press the On/O switch to stop the motor. Wait until the blades stop rotating.

Remove the cup and adapter from the blender base. Turn the cup over. Unthread

the adapter from the cup. Stir the ingredients. Add liquid if necessary. Reattach the

adapter, place on blender base and continue blending.

7. After blending, wait until the blades completely stop before removing the lid or container/cup from the blender base.

WARNING

To Avoid Possible Burns, Never Start on Speeds Above 1 when Processing Hot Liquids in a Large Container.

Escaping steam, splashes or contents may burn. Always start on Variable 1, then slowly increase to 10.

DO NOT use your 20 ounce cup or 8 ounce cup to heat ingredients or to blend hot liquids. Heated ingredients

and liquids may create internal pressure which could cause the cup to burst and cause injury.

DO NOT continuously use your machine for more than 2 minutes with the 20 ounce cup or 45 seconds for the

8 ounce cup.

If a cup becomes warm to the touch or steams or vents, immediately stop blending ingredients and turn o or

unplug blender.

Parts will become hot with extended use. DO NOT touch.

To secure the contents in a full size container, lock the lid and lid plug securely in place before operating the

blender.

Note: The cups mentioned here are optional accessories of the Ascent Blenders. Please visit www.vitamix.com for more information.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vitamix A3300 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info