540730
14
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
14
Wet Blade Container
Designed for processing liquids including juice, frozen mixtures, sauces, soups, purées, batters, and for
wet chopping.
1.
Make sure that the Variable Speed Dial is set to 1
.
2.
Load the container before placing it on the motor base. Place liquids and soft foods in the container
first, solid items and ice last. Although not necessary for blending, you may want to cut or break food
into smaller pieces for more precise measuring of ingredient
s.
3.
Securely fasten the 2-Part lid. Always use the complete 2-Part lid when blending (unless the tamper is
inserted through the lid plug opening). Especially when blending hot ingredients, make sure that the lid is
securely latched.
4.
With the motor o, set the wet blade container on the motor base by aligning it over the centering pad.
Never attempt to put a container on an operating motor base or to operate a motor base without a
container properly in place
.
5. Start with the On/O Switch in the On position. Always start your machine on variable speed 1.
Activate the machine by lifting up the Start/Stop Switch to the Start (
) position and slowly increase
the variable speed to the desired speed. Your container will shift and get into an aligned position.
6. If the mixture stops circulating, you may have trapped an air bubble. If inserting the tamper through the lid
plug while blending does not release it, reduce the speed on the dial to variable speed 5. Use the tamper
to stir until it “burps.” If these methods do not work, stop the motor, remove the container from the motor
base, and use a rubber spatula to press the air bubble away from the blades. Return the container to the
motor base, replace the lid, and continue blending.
7.
Take proper care when handling and processing hot ingredients and making hot soups and sauces
.
8.
Due to the machine’s speed, processing times are much quicker than standard appliances. Until you are
accustomed to the machine, count your time carefully to avoid over-processing
.
9.
After turning the machine o, wait until the blades completely stop before removing the lid or container
from the motor bas
e.
Never Start on Speeds Above 1 with
Hot Liquids to Avoid Possible Burns.
Use Caution; escaping steam or
splashes may scald.
Lock the lid. This will prevent
expansion from aecting the
position of the lid when the
machine is turned on.
Start on Variable 1, slowly
increase to 10.
CAUTION
OPERATING INSTRUCTIONS
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Vitamix Certified Reconditioned Next Generation wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info