Bedienungsanleitung Vitamix Professional Series 200 (Seite 5 von 80) (Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

540733

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Pro-500 and Total Nutrition Center 3 Models

1. On/O Switch (l)/(O): The On/O Switch controls the power to the machine base. The On/O Switch is located on the front of the

machine. After plugging in the unit, make sure the marker on the Variable Speed Dial is pointed at the Stop Symbol ( ) at the top of

the dial and move the On/O Switch to the On position.

Move the On/O Switch to the O position at night and whenever the machine will be left unattended.

If the On/O switch is moved to the O position to stop a program mid-cycle, wait 30 seconds for power to recycle and the timer to

reset before moving the On/O switch to the On position.

2. On/O Light: The On/O light is located on the front of the machine above the On/O switch. When lit, the machine is plugged in and

the On/O switch is in the On position. The light will ﬂash when a program is near completion.

3. Start ( )/Stop ( ) Switch: After the marker on the Variable Speed Dial is rotated o of the Stop Symbol ( ) to either Variable Speed

1 or a Program setting, press the Start/Stop Switch to start the machine and initiate the blending process. Pressing the Start/Stop

Switch again will stop the blending process.

Programs can be interrupted by pushing down the Start/Stop switch at any time. If reactivated by pushing down the Start/Stop switch,

the program will start at the beginning.

4. Pulse Switch ( ): Variable Speed: Pressing down on the Pulse Switch will cause the machine to blend at the speed setting shown on

Variable Speed Dial for as long as the Pulse Switch is held down. The Pulse function can be used when a program is selected. Pushing

down the Pulse switch when a program is selected will cause the machine to run at 50% of high power for as long as the Pulse switch

is pushed down.

CONTROL PANEL (CONTINUED)

5. Variable Speed Dial: The Variable Speed Dial serves two functions; the use of three programs settings or ten variable speed settings.

• To use programs: rotate the Variable Speed Dial to the left to the desired program.

• To use Variable Speed:

a. Rotate the Variable Speed dial right to 1.

b. Press down on the Start/Stop switch.

c. Rotate the Variable Speed dial between 1 and High during the blending cycle to increase or decrease the speed of the blades.

d. At the end of the blending cycle, rotate the Variable Speed Dial back to the Stop Symbol ( ).

6. Programs: Your machine is equipped with three program settings for the most commonly used recipes. Rotating the Variable Speed

Dial left of center allows you to select a program for Smoothies, Frozen Desserts, and Hot Soups. These programs are optimized

for these recipe categories, but may also work well with other recipe choices. Programs vary in blending speed and duration and

will automatically stop at the end of the program. Programs can be interrupted by pushing down the Start/Stop switch at any time.

If reactivated by pushing down the Start/Stop switch, the program will start at the beginning.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vitamix Professional Series 200 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Vitamix Professional Series 200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info