Bedienungsanleitung Vitamix Professional Series 200 (Seite 8 von 80) (Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

540733

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

SPECIFICATIONS

104501 1/14

Corporation. No part of this publication may be reproduced or transmitted in any form or by any means or stored in a database or retrieval

system without the written permission of the Vita-Mix® Corporation.

Printed in the U.S.A.

WARRANTY AND SERVICE

Refer to vitamix.com/international for distributor listing for information about warranty and service.

If you are buying a new electrical item, the Waste Electrical or Electronic Equipment (WEEE) Directive will recycle your old one for free

(where applicable).

This product has been supplied from an environmentally aware manufacturer that complies with the Waste Electrical and Electronic

Equipment (WEEE) Directive 2002/96/CE.

Refer to the product label on the machine for Motor and Electrical specifications.

Used appliances may not be disposed of in the dustbin! If the appliance has reached the end of its service life,

every user is obliged by law not to dispose of used appliances in the domestic dustbin, but rather separated from

household trash, e.g. at a community or neighbourhood collection point. This is to ensure that used appliances are

professionally recycled in order to avoid damage to the environment. That is why electric appliances are marked with

the following symbol:

Find more information on WEEE recycling and locate your local recycling centre at www.recyclenow.com.

Your Vitamix motor is designed to protect from overheating and overcurrent conditions during use. Both features will shut o the motor.

The motor will possibly emit a slight odor. Follow the procedures below to reset the motor for either situation. If you continue to experience

problems after following these instructions, contact your local distributor immediately for instructions.

Overheat Protection Reset Procedure

If the motor shuts o due to overheating while blending, allow the machine to cool for 20 to 45 minutes before beginning another blending

cycle. If the motor will not start after being allowed to cool, perform the Automatic Overcurrent Protection Reset Procedure below.

Overcurrent Protection Reset Procedure

1. Push the On/O switch down to the O position (O).

2. Unplug the unit.

Reset Button

Front

Back

TROUBLESHOOTING

3. Remove the container.

4. Turn the motor base on its side.

5. Press the reset button on the bottom of the machine.

6. Plug unit in and continue with the blending cycle.

Tips to prevent “overloading” your Vitamix machine:

• ProcessonlyVitamixrecipeswhenlearningtousethemachine

• Donotprocessrecipesatlowerorhigherspeedsthanrecommended

• Donotprocessrecipeslongerthanrecommended

• Useyourtampertoprocessthickermixturesandkeepingredientsmovingaround

and through the blades

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vitamix Professional Series 200 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Vitamix Professional Series 200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info