540734
14
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
14
Wet Blade Container
Designed for processing liquids including juice, frozen mixtures, sauces, soups,
purées, batters, and for wet chopping.
1. Make sure that the Variable Speed dial is set to 1.
2. Load the container before placing it on the motor base. Place liquids and soft foods
in the container first, solid items and ice last. Although not necessary for blending,
you may want to cut or break food into smaller pieces for more precise measuring
of ingredients.
3. Securely fasten the 2-Part lid. Always use the complete 2-Part lid when blending
(unless the tamper is inserted through the lid plug opening). Especially when
blending hot ingredients, make sure that the lid is securely latched.
4. With the motor o, set the wet blade container on the motor base by aligning it
over the centering pad. Never attempt to put a container on an operating motor
base or to operate a motor base without a container properly in place.
5. Start with the On / O Switch in the On position. Always start your machine on
Variable Speed 1. Activate the machine by lifting up the Start / Stop Switch to the
Start ( ) position and slowly increase the Variable Speed to the desired speed.
Your container will shift and get into an aligned position.
6. If the mixture stops circulating, you may have trapped an air bubble. If inserting the
tamper through the lid plug while blending does not release it, reduce the speed on
the dial to Variable Speed 5. Use the tamper to stir until it “burps.” If these methods
do not work, stop the motor, remove the container from the motor base, and use a
rubber spatula to press the air bubble away from the blades. Return the container
to the motor base, replace the lid, and continue blending.
7. Take proper care when handling and processing hot ingredients and making
hot soups and sauces.
8. Due to the machine’s speed, processing times are much quicker than standard
appliances. Until you are accustomed to the machine, count your time carefully to
avoid over-processing.
9. After turning the machine o, wait until the blades completely stop before removing
the lid or container from the motor base.
OPERATING INSTRUCTIONS
CAUTION
Never Start on Speeds Above 1 with Hot
Liquids to Avoid Possible Burns.
Escaping steam, splashes or contents may scald.
To secure the contents, lock the lid and lid plug
securely in place prior to operating the machine.
Always start on Variable 1, slowly increase to 10.
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Vitamix Professional Series 300 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Vitamix Professional Series 300

Vitamix Professional Series 300 Bedienungsanleitung - Deutsch - 48 seiten

Vitamix Professional Series 300 Bedienungsanleitung - Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch - 100 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info