Bedienungsanleitung Vitamix Professional Series 300 (Seite 6 von 100) (Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

540734

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Pro-750 Model

1. On / O Switch:

The On/Off (or Power) Switch is on the right-hand side of the machine base. The On/Off Switch controls the power to the machine.

BEFORE moving the On / O Switch to the On (I) position, make sure that the marker on the Variable Speed Dial is pointed at

the Stop Symbol ( ) at the top of the dial. Move the On / O Switch to the O position at night and whenever the machine is

left unattended. If the On / O switch is moved to the O position to stop a program mid-cycle, wait 30 seconds for power

to recycle and the timer to reset before moving the On / O switch back to the On position. When the Pulse, Start / Stop, and

Program Symbols brighten, the On / O Switch is in the On position and power is ﬂowing.

2. Start ( ) / Stop ( ) Switch:

After the marker on the Variable Speed Dial is rotated from the Stop Symbol ( ) either to Variable Speed 1 or a Program, press the

Start / Stop Switch to start the machine and initiate the blending process. Pressing the Start / Stop Switch again will stop the

blending process.

Programs can be interrupted by pushing down the Start / Stop switch at any time. If reactivated by pushing down the Start / Stop

switch, the program will start at the beginning.

3. Pulse Switch ( ):

Variable Speed: Pressing down on the Pulse Switch will cause the machine to blend at the speed setting shown on the Variable Speed

Dial for as long as the Pulse Switch is held down.

Programs: The Pulse function can be used when a program is selected. Pushing down the Pulse switch when a program is selected

will cause the machine to run at 50% of high power for as long as the Pulse switch is pusheddown.

4. Variable Speed Dial:

The Variable Speed Dial serves two functions: the use of ﬁve program settings or ten variable speed settings.

• Programs: rotate the Variable Speed Dial to the left to the desired program.

• Variable Speed:

a. Rotate the Variable Speed dial to the right to 1.

b. Press down on the Start / Stop switch.

c. Rotate the Variable Speed dial to the right or left during blending to increase or decrease the speed of the blades.

d. At the end of the blending cycle, rotate the marker on the Variable-Speed dial back to the Stop Symbol ( ) at the top of

thedial.

5. Programs:

The Pro-750 is equipped with ﬁve program settings for the most commonly used recipes. Rotating the Variable Speed Dial left of

center allows you to select a program for Smoothies, Frozen Desserts, Soups, Purées and a Cleaning cycle.

CONTROL PANEL (CONTINUED)

OFF

CAUTION

To Avoid Possible Burns, Never Start on Speeds Above 1 when

Processing Hot Liquids.

Escaping steam, splashes or contents mayscald.

To secure the contents, lock the lid and lid cap securely in place prior to

operating the machine.

Always start on Variable 1, then slowly increase to 10.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vitamix Professional Series 300 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Vitamix Professional Series 300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info