653443
5
Zoom out
Zoom in
Vorherige Seite
1/23
Nächste Seite
5
T&G2 Blending Station
®
ON/OFF switch - Located on the side of the motor base the ON/OFF switch controls the power
to the machine. With the machine plugged in, switch the machine to ON to ready the machine
for blending.
SIX PROGRAM buttons - These buttons, numbered 1 thru 6, are pre-programmed blending cycles
designed for the most commonly made drinks. Depending on the viscosity of the drink you are
creating, pressing one of the six PROGRAM buttons will run the machine for a full cycle. The
machine will stop by itself when the cycle is complete. Or you can press one of the buttons to stop the
machine in the middle of a program cycle. Each button can be reprogrammed. See programming
instructions on page 11 for more information. A cycle varies in speed and length, see the instructions on
page 12 for a complete description of the range of each button. Due to the difference of recipes, your
results may vary.
DISPLAY WINDOW - This area depending on what button is pressed, displays a variety of
operation messages. A ‘READY’ message appears when there is power to the machine.
HIGH/LOW PULSE button - The PULSE button provides a quick increase in speed of the blades
for refreshing or finishing a drink. Press H to increase the motor speed to 100%. Press L to increase
the motor speed to 50%. The PULSE button will override the running program. Once released the
original program continues its cycle.
OWNER CONTROLS - Press the Vita-Mix logo to access the T&G 2 Blending Station control panel.
Press once to reveal the option to reprogram the the SIX PROGRAM
buttons. See page 11 for instructions.
Press twice to exit programming and continue blending.
Press and hold until screen changes to “
PROGRAM
ALL
T
O
”. See page 11
for instructions.
Press and hold while turning the machine on, screen changes to “6 TO
RESTORE”. Press the number six button to clear the settings of the
machines six programmed buttons and restore them to their original factory
settings. Follow the instructions on page 11 to re-program the buttons.
Six Program Buttons
Owner Controls
High/Low Pulse
Display Window
ontrol Panel
C
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Vitamix T G 2 - Blending Station wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info