Bedienungsanleitung Vitamix The Quiet One - Blending Station (Seite 14 von 92) (Englisch, Holländisch, Dänisch, Schwedisch, Norwegisch)

653442

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

Problems:

• Loud noise from blender container blade area

• Container blades do not spin

• Increased vibration

• Leaking from bottom of container

Possible Actions:

Broken or worn drive socket.

Replace drive socket.

Loud grinding noise from the blender motor

Damaged motor bearings, your

machine may need to be repaired.

Contact your distributor.

• Machine will not run

• Display window does not say “Ready”

Double-check to make sure power

cord is ﬁrmly in power outlet.

2. Check to make sure the On/

O power switch is in the

on position.

Turn the On/O power switch

to o, then on, to reboot

the electronics.

Machine starts then shuts o Make sure there is power to the machine.

Display window reads “SHUT DOWN SEE MANUAL” Let the machine cool for an hour, restart.

Display window reads

“MOTOR LOCKED PROGRAM TERMINATED”

Let the machine cool for an hour, restart.

• Machine is running irregularly

• “NO PROGRAM” is displayed when a button is pushed

• Button pressed starts wrong program

• Machine starts by itself

• A speciﬁc program button is defective

• Machine does not work when ﬁrst tried

• Machine works but no information displayed on screen

• Program buttons run the blender on the same speed

1. Turn the machine o and on again to

reset the programming.

Try plugging the machine into

another outlet.

Display window reads “CORRUPT DATA” Turn the machine o and on again to reset

the programming.

Display window reads “THERMAL SENSOR FAILURE” Call Vitamix technical support.

Machine stops in the middle of its blend cycle and resets;

display window reads “VITAMIX GENERAL PROGRAM”

then “READY”

Plug the machine into its own

power supply.

Make sure the machine is not running

on a long extension cord.

If the machine has overheated: The motor will stop and

the message “MOTOR HAS OVERHEATED REMOVE THE

CONTAINER, THEN PRESS START,” will scroll across the

display window, while the words “HOT SHUTDOWN” will

remain in the display window.

Remove the container, shut the cover door

and press the Start/Stop button and run

the machine for two minutes. When the

motor is cool, “READY” will appear in the

display window.

TROUBLESHOOTING

If you cannot ﬁx your machine with these suggestions, technical help is available by calling Vitamix®

technical support at 800.886.5235. If you purchased your equipment outside the U.S.A., contact your local

Vitamix Distributor or telephone the Vitamix International Division at +1.440.782.2450 or email international@

vitamix.com for a distributor in your country. For online help, visit www.vitamix.com/foodservice.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vitamix The Quiet One - Blending Station Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info