Bedienungsanleitung Vivanco ur zap 2 (Seite 2 von 25) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch)

122475

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, Tel:+49 (0)4102

231235, Fax: +49(0)4102 231444, e-Mail: hotline@vivanco.de 2

(GB) Instructions

UR Zap 2 remote control for TV sets, satellite receivers

and cable boxes

1 Inserting the batteries

Open the battery flap on the back of the remote control and

insert 2 alkaline AAA batteries. Check that the polarity

markings on the batteries and in the battery compartment are

correctly lined up (+=+), then close the flap carefully. – Always

use undamaged, fully charged batteries.

2 Adapting to appliances

In order to control your appliances you must adapt or set the

remote control to them. There are two ways of doing so: direct

control code entry or code search.

2.1 Direct control code entry using the enclosed list

Example: setting to control a Panasonic television set:

2.1.1 Using the TV button, select to control a television set

(TV).

2.1.2 The enclosed list gives, for example, the Panasonic

Code 241.

Please make sure you have selected the correct list for

television sets (TV).

2.1.3 To prepare code entry, keep the Mute (sound on/off)

button and the PWR (appliance on/off) button pressed

simultaneously(!) until the lamp (LED) lights constantly.

2.1.4 Then enter the code numbers as follows:

2.1.4.1 1st number of code (hundreds = Volume -): Press the

VOL- (volume down) button- twice for 2 of 241. Press as

often as the number indicates. (1=once, 2 = twice, etc.)

2.1.4.2 2nd number of code (tens = Channel+): Press the

CH+ (channel up) button four times for the 4 of 241.

2.1.4.3 3rd number of code (ones = Volume+): Press the

VOL+ (volume up) button once for the 1 of 241.

2.1.4.4 Finally, press the Mute button again briefly. The lamp

(LED) goes out. To enter a 0, do not press any button. If

incorrect entries are made the remote control blinks for about 3

seconds.

2.1.5 Then test the control code setting by trying to control (in

this example) your television set. If it does not work at all or not

correctly try a different code from the list or code search (see

below).

2.1.6 To make the setting for a satellite receiver or a cable

box, press the SAT button instead of TV and enter a satellite

code accordingly.

2.2 Code search

If the brand of your appliance is not in the list or none of the

codes given fits, we recommend a code search.

2.2.1 Switch on the appliance to be controlled. Program is

running. A channel number, for example, appears in the

display of your satellite receiver.

2.2.2 Press the TV or SAT appliance button according to the

appliance type to be controlled, e.g. SAT.

2.2.3 Keep the ON/OFF PWR (appliance on/off) and Mute

buttons pressed simultaneously(!) until the lamp lights

constantly.

2.2.4 Press the ON/OFF PWR (appliance on/off) button once

briefly.

2.2.5 The UR Zap 2 emits a different signal every 1.3

seconds. When your appliance reacts, very quickly press the

Mute button to confirm a functioning control code. – It is

advisable to have your finger already placed on the Mute

button so that you can react quickly enough. Otherwise the UR

Zap 2 emits the next signal before you have reacted.

2.2.6 Finally, test the control code setting by trying to control

your SAT appliance. If it does not work correctly, please try the

code search again.

Note: Remember to switch your appliance, e.g. SAT, back on

again if you wish to continue searching.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vivanco ur zap 2 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info