520742
32
Zoom out
Zoom in
Vorherige Seite
1/84
Nächste Seite
- 31 -
www.vivotek.com
Video, camera mapping and motion detection
Enable video channels
Only when the video source is "Enable", the related link will be displayed in the main
page. There are four buttons for “Image setting”, “Camera setting”, “Motion detection”
and “Privacy mask” regarding to each video channel. The details are described in later
paragraphs. The video “Modulation” can be automatically detected by the system or
manually selected by administrators. Administrators can choose any video channel to be
“Default video source” shown in the main page when users connect at the first time.
Adjust image settings
"Time stamp" and "Text on image" will be enclosed in image for reference. The
timestamp is captured from date and time of Video Server that is maintained by an
on-board real-time clock. "Color" setting is independent of the connected camera and
B/W” option can speed up the encoder a little. “Default quality” option here will be
the default quality when users first connect to Video Server. “Default size” option here
will be the default size of video window when users first connect to Video Server. To
customize for different camera, administrators can adjust "Brightness", "Contrast",
"Hue" and "Saturation" for video compensation of each channel. While adjusting,
administrators can click on “Apply” to check prior to “Save” the setting in memory. If the
adjustment is not good, administrators can click on “Restore” to restore the original
settings without change. To facilitate the settings of four video channels, administrators
can click on “Save all” then every setting in this channel will copy to other channels. Note
that the “Text on image” may need to change for each channel. After configuration done,
click on “Close” to close this window. If parameters are changed without saving, they will
be used until the next system startup.
Configure attached motorized camera
In addition to configuring PTZ camera driver in Camera Control page, administrators
have to define the relationship between video channel and camera. If there is any PTZ
camera attached, administrators should select the “Camera type” as “PTZ camera”,
set the attached interface and the ID of the PTZ camera. The ID is specific to the camera
and necessary for multiple camera control. Refer to the manual of camera for ID settings.
After clicking on “Save”, the preset function will appear in the lower half of window. There
are up to twenty positions can be memorized. Administrators can move the camera and
then enter the position name and save. The old “Preset position” can also be pulled
down to delete.
32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Vivotek VS2403 Video Server wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Vivotek VS2403 Video Server

Vivotek VS2403 Video Server Kurzanleitung - Englisch - 7 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info