Bedienungsanleitung Vizio E220MV (Seite 40 von 51) (Englisch)

663691

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

VIZIO E190

MV/E220MV User Manual

www.VIZIO.com

Troubl

eshooting Guide

If the TV fails or the p

erformance changes dramatically, check the display in accordance with the

following instructions. Remember to check the peripherals to pinpoint the source of the failure. If

the display still fails to perform as expected, contact the VIZIO for assistance by calling 1-877-

MYVIZIO (698-4946) or e-mail us at

techsupport@VIZIO.com.

General TV

Problems

Solution

Receiv

e the error message

“No Signal.”

 Press the INPUT button on the remote control to select a different input

source.



If you are usi

ng cable connected directly to the TV or an antenna,

scan for channels from the Tuner menu in the on-screen menu.

No po

wer.

 Make sure the power button is ON.

 Make sure power adapter is securely connected to the AC socket.

 Plug another electrical device to the power outlet to verify that the outlet

is working.

No sou

nd.

 Press Volume + (Up) on the remote control.

 Press MUTE on the remote control to make sure that MUTE is not ON.

 Check your audio settings. The audio may be set to SAP, or the

speakers are set to off.

 Make sure that headphones are not connected.

 Check the audio connections of external devices that may be connected

to your HDTV.

 If you are using an antenna, the signal strength of the channel may be

low. Make sure your antenna is connected securely to the TV and move

the antenna around the room or close to a window.

If the screen is black.

 Make sure the power button is ON.

 Press the INPUT button on the remote control to select a different input

source.

 Check the connections of external devices that may be connected to

your HDTV.

Power is ON but there is no

image on the screen.

 Make sure all cables attached to your HDTV are connected to the

correct output on the external device.

 Adjust brightness, contrast or backlight.

 Press the INPUT button on the remote control to select a different input

source.

Wrong or abnormal colors

appear.

 Check Color and Tint settings in Picture Menu.

 Reset Picture settings.

 Check the video cables to make sure they are securely connected.

 If you are using an antenna, the signal strength of the channel may be

low. Make sure your antenna is connected securely to the TV and move

the antenna around the room or close to a window.

Contro

l buttons do not work.

 Press only one button at a time.

Remote co

ntrol does not

work.

 Point the remote control directly at the remote sensor on your TV.

 Remove any obstacles between the remote control and the remote

sensor.

 Replace dead batteries with new ones.

 Make sure you have selected TV mode on the remote control.

here appear to be image

 If you are using an antenna, the signal strength of the channel may be

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vizio E220MV Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info