Bedienungsanleitung Vizio XWR100 (Seite 15 von 21) (Englisch)

629188

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

Use this method if your client device asks for your router’s PIN number.

Enter the PIN number listed on this screen and on the Quick Setup Guide. The wireless device will connect to your router using that PIN.

Advanced

A new menu will be displayed showing the advanced options available for the Advanced Wireless Settings. Choose a Network Name from the

drop down list to change the settings for that network.

WIRELESS MAC FILTER

Enter MAC addresses in the spaces provided to prevent or permit wireless devices with those addresses from accessing the wireless

network. Click Wireless Client List to add MAC addresses by choosing them from a list of clients detected by your router. Click MORE

to add more addresses.

NETWORK SETTINGS

Network Mode

5 GHz: Select the wireless mode used by the network. Choose from Disabled, Mixed, Wireless-A Only, or Wireless-N

Only.

2.4 GHz: Select the wireless mode used by the network. Choose from Disabled, Mixed, Wireless-G Only, Wireless-B

Only, or Wireless-BGN.

Network Name (SSID): Each wireless network has a unique name

or SSID. Your three wireless networks have default names which you

can customize. If you change the name, consider using something

unique to make sure it is not the same as other wireless networks

that your router may detect in the area. Do not use personal

information that can be visible to other users in your area searching

for wireless networks.

Channel Width

5 GHz: Select Auto (20MHz or 40MHz) for best

performance in a network using Wireless-A and Wireless-

N (5 GHz) devices. Select 40MHz only for a channel

width of 40 MHz and select 20MHz only for a channel

width of 20 MHz.

2.4 GHz: Select Auto (20MHz or 40MHz) for best

performance in a network using Wireless-B, Wireless-G

and Wireless-N (2.4 GHz) devices. Select 40MHz only for

a channel width of 40 MHz and select 20MHz only for a

channel width of 20 MHz.

Wide Channel

5 GHz: Select 40MHz only or Auto (20MHz or 40MHz) to have this setting be available for your primary Wireless-N (5GHz)

channel. Select Auto if you are not sure which channel to select.

2.4 GHz: Select 40MHz only or Auto (20MHz or 40MHz) to have this setting be available for your primary Wireless-N

(2.4GHz) channel. Select Auto if you are not sure which channel to select.

Standard Channel

5 GHz: Select the channel for Wireless-A and Wireless-N (5GHz) networking. If you selected 40MHz only or Auto (20MHz or

40MHz) for Channel Width, then the Standard Channel will be a secondary channel for Wireless-N (5GHz). Select Auto if you

are not sure which channel to select.

2.4 GHz: Select the channel for Wireless-B, Wireless-G, and Wireless-N (2.4GHz) networking. If you selected 40MHz only or

Auto (20MHz or 40MHz) for Channel Width, then the Standard Channel will be a secondary channel for Wireless-N (2.4GHz).

Select Auto if you are not sure which channel to select.

SSID Broadcast: Hide your network name (SSID) so people who are not on your network cannot see it in their list of available networks.

AP Isolation: This isolates all wireless clients and wireless devices on your network from each other. Wireless devices will be able to

communicate with your router but not with each other.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vizio XWR100 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info