Bedienungsanleitung Volkswagen Passat 2015 (Seite 374 von 397) (Englisch)

708067

374

Zoom out

Zoom in

Vorherige Seite

1/397

Nächste Seite

If a wheel bolt does not come loose, carefully push the end of the lug wrench with your foot. Make sure

you are standing firmly on the ground and hold on to the vehicle for support.

Loosening the wheel bolts

 Push the lug wrench over the wheel bolt all the way ⇒

fig. 209.

 Holding the lug wrench at the end, loosen the wheel bolt by turning it counterclockwise about 1

complete turn (360°) ⇒ .

Loosening the anti-theft wheel bolt (where applicable)

 Take the adapter for the anti-theft wheel bolt out of the vehicle tool kit.

 Push the adapter all the way over the anti-theft wheel bolt.

 Slide the lug wrench onto the adapter until it stops.

 Holding the lug wrench at the end, loosen the wheel bolt by turning it counterclockwise about 1

complete turn (360°) ⇒ .

Important information regarding wheel bolts

The design of rims and wheel bolts is matched to the factory-installed wheels. If different wheels are

installed, wheel bolts with the right length and bolt head shape must be used. The attachment of the

wheels and function of the brake system depend on this.

It may not be possible to use wheel bolts from different vehicles of the same model.

Where applicable: On a wheel with a wheel cover, the anti-theft wheel bolt must be installed at points

⇒

fig. 210 (2) or (3) in relation to the position of the tire valve (1). Otherwise, the wheel cover cannot

be installed.

Wheel bolt tightening torque

Correctly tightened bolts for steel and alloy wheel rims should have a torque of 103 ft-lbs. (140 Nm).

After changing a wheel, have the wheel bolt tightening torque checked right away with an accurate

torque wrench.

Before you check the tightening torque, replace corroded and difficult-to-turn wheel bolts and clean

the threads in the wheel hub.

Never grease or oil the wheel bolts and the threads in the wheel hubs. The bolts can come loose while

driving if greased or oiled, even if tightened to the required torque.

WARNING

Improperly tightened wheel bolts can come loose while driving and cause you to lose control

over the vehicle, resulting in accidents and serious injuries.

 Only use wheel bolts that belong your vehicle and to the wheel being installed.

 Never use different wheel bolts.

 Wheel bolts and wheel hub threads must always be clean, easy-to-turn and free of oil and

grease.

 Only use the lug wrench that is supplied with the vehicle to loosen the wheel bolts.

 Loosen the wheel bolts only about 1 turn before lifting the vehicle with the jack.

 Never grease or oil the wheel bolts and the threads in the wheel hubs. The bolts can come

loose while driving if greased or oiled, even if tightened to the required torque.

 Never loosen bolted connections on wheel rims with bolted rim rings.

 If the wheel bolts are not tightened to the proper torque, the wheel can come off the vehi-

cle when it is moving. Extremely high torque can damage the wheel bolts and/or their

threads.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Volkswagen Passat 2015 Seite 374

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info