Bedienungsanleitung Volkswagen Tiguan 2014 (Seite 87 von 418) (Englisch)

708066

Zoom out

Zoom in

Vorherige Seite

1/418

Nächste Seite

Storing passenger side outside mirror settings for backing up

 Apply the electronic parking brake.

 Shift the transmission into Neutral (N).

 Switch the ignition on.

 Briefly press the desired memory button 1 , 2 or 3 on the driver door.

 Shift the transmission into Reverse (R).

 Adjust the passenger outside mirror to provide good visibility of the curb, for example.

 The adjusted mirror position is automatically stored and assigned to the vehicle key used to unlock

the vehicle. The preselected position will be recalled when the key assigned to that mirror adjustment

position is used again.

The passenger-side outside mirror automatically adjusts back from the position stored for backing up

when the vehicle moves forward at about 10 mph (15 km/h) or more or when the rotary knob ⇒

fig. 96

is rotated from (R) into a different position.

Recalling settings for driver seat and outside mirrors

 Briefly press the appropriate memory button when the vehicle is not moving, the ignition is

switched off, and the driver door is open.

 OR: If the ignition is switched on and the driver door is closed, press and hold the appropriate

memory button until the stored position is reached.

 The passenger-side outside mirror automatically adjusts back from the position stored for backing

up when the vehicle moves forward at about 10 mph (15 km/h) or more or when the rotary knob is

rotated from (R) into a different position.

Assigning driver seat and outside mirror settings to a vehicle key

The memory function of all vehicle keys is disabled when the vehicle is first delivered from the factory.

To enable vehicle key memory feature:

 Unlock the driver door.

 Press and hold a memory button until memory position is reached.

 Press and hold the unlock button  on the vehicle key and then press the desired memory button

at the same time within about 3 seconds. A chime sounds to confirm activation.

To disable remote control vehicle key memory function:

 Press and hold the SET button.

 Press and hold the unlock button  on the remote control vehicle key within about 10 seconds. A

chime sounds to confirm deactivation.

Assigning settings to an additional vehicle key

 Follow the instructions ⇒ Assigning driver seat and outside mirror settings to a vehicle key to

assign the driver seat and outside mirror settings to the vehicle key.

 Unlock the vehicle with the same vehicle key.

 Adjust driver seat and outside mirrors.

 Lock the vehicle with locking button  in the vehicle key to store the settings.

Once the settings are stored, the driver seat and the outside mirrors move to the stored positions

whenever the vehicle is unlocked with the vehicle key open button  and the driver door is opened. If

2 people use the vehicle, each of them should always use the key in which his or her personal settings

have been stored.

Initializing the memory seats

The memory system must be initialized by an authorized Volkswagen dealer, an authorized

Volkswagen Service Facility, or another qualified workshop in certain situations, for instance, if a new

driver seat is installed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Volkswagen Tiguan 2014 Seite 87

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info