Bedienungsanleitung Voltcraft PB-13 OUTDOOR-POWERBANK (Seite 4 von 8) (Deutsch, Englisch, Holländisch, Französisch)

660981

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

OPERATION

Charge the internal rechargeable battery completely before rst-time use.

Verify that your mobile device’s connection values correspond with the

product’s connection values (see technical data).

Do not short-circuit the USB connections.

The product is suitable for outdoor use only with the cover ap closed. With

the cover ap open, the product is suitable for use in indoor spaces only.

a) Charging the internal rechargeable battery

1. Open the cover ap.

2. Connect the Micro-USB plug to the Micro-USB port.

3. Connect the USB-A plug to a free USB port on your computer or a suitable USB power

adapter.

4. The internal rechargeable battery is now charging.

5. As soon as the internal rechargeable battery is fully charged, all 4 LEDs of the charge

status indicator light up permanently.

6. Disconnect the cable from the product and the power supply as soon as the rechargeable

battery is fully charged. The product is now ready for use.

For infrequent use, we recommend fully charging the internal rechargeable battery once

every three months to maintain maximum performance.

Charge status display while charging the internal rechargeable battery

Capacity LED 1 LED 2 LED 3 LED 4

75 - 100 % on on on on

50 - 75 % on on on off

25 - 50 % on on off off

0 - 25 % on off off off

If only the last of the 4 LEDs is on, the capacity of the internal rechargeable battery is

below 25 %. In this case, recharge the internal rechargeable battery.

b) Charging a mobile device

1. Open the cover ap.

2. Connect the USB-A plug to the USB-A port.

3. Connect the Micro-USB plug to the mobile device. Charging begins automatically. Press

the on/off switch if charging does not begin automatically.

4. Monitor the charging process. Once the charging has been completed, disconnect the

cable from the product and the mobile device. The product turns off automatically once the

mobile device is fully charged.

Charge status display while charging a mobile device

Capacity LED 1 LED 2 LED 3 LED 4

80 - 100 % on on on on

60 - 80 % on on on off

40 - 60 % on on off off

0 - 40 % on off off off

When charging a mobile device, the charge status of the internal rechargeable battery

is displayed when charging begins.

c) LED light

Press the on/off switch twice to turn the LED light on/off.

d) Attaching compass and snap hook

1. Thread the strap through the eyelet.

2. Thread the end of the strap above the eyelet through the metal ring.

3. Attach the compass to the end of the strap.

4. Open the snap hook and insert it through the end of the strap.

Failure to attach the snap hook poses the risk that the compass may be

damaged due to falling.

CLEANING AND MAINTENANCE

Do not use any aggressive cleaning agents, rubbing alcohol or other chemical

solutions as they can cause damage to the housing and malfunctioning.

• Disconnect the cable from the product before cleaning.

• There are no components located inside the product you need to maintain. Never open/

dismantle the product.

• To clean the product, a dry, soft and clean cloth is sufcient. Do not apply too much

pressure to the housing to prevent scratching.

• You can easily remove dust using a long-haired, soft and clean brush.

DISPOSAL

a) Product

Electronic devices are recyclable waste and must not be disposed of in the

household waste.

At the end of its service life, dispose of the product according to the relevant

statutory regulations.

The built-in rechargeable battery must be disposed of by a specialist.

b) Rechargeable battery

You as the end user are required by law (Battery Ordinance) to return all used rechargeable

batteries. Disposing of them in the household waste is prohibited.

Contaminated rechargeable batteries are labelled with this symbol to indicate that

disposal in the domestic waste is forbidden. The designations for the heavy metals

involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on rechargeable

batteries, e.g. below the trash icon on the left).

Used rechargeable batteries can be returned to collection points in your

municipality, our stores or wherever rechargeable batteries are sold.

You thus full your statutory obligations and contribute to the protection of the environment.

TECHNICAL DATA

Input...................................................... 5 V/DC, 2 A

Output ................................................... 5 V/DC, 2.1 A

Internal rechargeable battery ................ Li-ion, 3.7 V, 9000 mAh

Protection type ...................................... IP67

Operating and storage conditions ......... -10 to +40 ºC

Dimensions (W x H x D) ....................... 64 x 28 x 101 mm

Weight .................................................. 234 g

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in

electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

This publication represents the technical status at the time of printing.

Voltcraft PB-13 OUTDOOR-POWERBANK Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info