Bedienungsanleitung Voltcraft PM-40 (Seite 4 von 8) (Deutsch, Englisch, Holländisch, Französisch)

738293

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite



This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data

processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent

the technical status at the time of printing.





• If the US power meter shows a voltage low 4.8 V, then in general the current required by

the connected USB device (a smartphone for example) is too high. If this is the case, use

e.g., a USB power adapter with a higher output current. Furthermore, preferably use a

thicker and shorter USB cable, if possible, if the current values are high.

• If no indicator appears on the USB power meter’s display, then the USB power meter is in

power saving mode. Press button “4” briey to switch on the display.

• If data is supposed to be transferred, you have to select operating mode “D” by using the

sliding switch (3). This facilitates the USB2.0 / 1.1 connection.

• Always use the sliding switch (3) to select the correct setting (see chapter “Operation”), if an

Apple device or Android device needs to be charged.

Otherwise the charging current will be much lower.



The product does not require any maintenance and should never be disassembled for any

reason.

Clean the product carefully, e.g., with a soft, clean cloth.

Never use aggressive cleaning agents or chemicals for cleaning; these can lead not only to

discolouration, but can also damage the product.



The product must not be disposed of with the household waste.

Please dispose of the product at the end of its service life according to the current

statutory requirements.



Power supply ........................................via USB

Internal current consumption ............... approx. 8 mA (in power saving mode with the display

switched off aprox. 5 mA)

Measurement range .............................Voltage: 3.5 - 5.8 V/DC

..............................................................Current: 0.03 A - 3 A

Resolution .............................................Voltage: 10 mV

..............................................................Current: 10 mA

Connected load ....................................max. 15 W (5 V/DC x 3 A)

Ambient conditions ............................... Temperature 0 °C to +70 °C; humidity 0% to 80%,

non-condensing

Dimensions ...........................................44 x 19 x 19 mm (L x W x H)

Weight ..................................................9 g

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Voltcraft PM-40 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info