Bedienungsanleitung Voltcraft VC276 TRMS (Seite 44 von 152) (Deutsch, Englisch, Holländisch, Französisch)

738224

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

5. Safety information

These instructions contain important information on how to use the multimeter correctly. Please

readthemcarefullybeforeusingthemultimeterforthersttime.

Damage caused due to failure to observe these instructions will void the warranty. We shall not be

liable for any consequential damage.

We shall not be liable for damage to property or personal injury caused by incorrect handling or

failure to observe the safety information! Such cases will void the warranty/guarantee.

• This device was shipped in a safe condition.

• We kindly request the user to observe the safety instructions and warnings contained in the enclosed

operating instructions so this condition is maintained and to ensure safe operation.

• Check that the measuring device is functioning correctly with a known source before using it.

• Theunauthorisedconversionand/ormodicationofthedeviceisnotpermittedforsafetyandapproval

reasons.

• Check that the measuring device is functioning correctly with a known source before using it.

• Consult a technician if you are not sure how to use or connect the device.

• Measuring instruments and their accessories are not toys and must be kept out of the reach of children.

• Always comply with the accident prevention regulations for electrical equipment when using the product

in commercial facilities.

• In schools, educational facilities, hobby and DIY workshops, the multimeter must be used under the

responsiblesupervisionofqualiedpersonnel.Thesameapplieswhenthemultimeterisusedbypeople

with reduced physical and mental capabilities.

• Before each measurement, always make sure that the meter is not set to a different measurement func-

tion.

• When using measuring probes without protective caps, measure-

ments between the multimeter and the earth potential must not ex-

ceed the CAT II measurement category.

• When taking CAT III measurements, the cover caps must be placed

on the probe tips (max. length of exposed contacts = 4 mm) to avoid

accidental short circuits. These are supplied with the device.

• The measuring probes must be removed from the measured object

every time the measuring range is changed.

• The voltage between the multimeter connection points and earth must never exceed 600 V DC/AC in

CAT III.

• Exercise particular caution when working with voltages higher than 33 V (AC) and 70 V (DC). Touching

electrical conductors with these voltages may cause a fatal electric shock.

• To prevent an electric shock, do not touch the connections/measuring points when taking measurements,

either directly or indirectly. When taking measurements, do not touch any area beyond the grip markings

on the test probes / test leads.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Voltcraft VC276 TRMS Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info