Bulbs Power Socket
US Bulb
No
CP/W
1 Rear turn signal 32/21 Ba15s 1073
2 Stop light 32/21 Ba15s 1073
3 Tail light, side marker
light
4/5 Ba15s 67
4 Tail light 4/5 Ba15s 67
5 Back-up light 32/21 Ba15s 1073
All tail lamp bulbs are replaced from inside of trunk.
1 Unscrew and remove tail lamp rim. Note that rim is hooked at the upper edge. Lift the lower end out/
up and unhook upper edge.
2 Turn bulb holder approx. 3/8" counterclockwise and remove it.
3 Depress bulb in bulb holder, turn it slightly counterclockwise, and remove it.
4 Install a new bulb. Install bulb holder in tail lamp.
NOTE:
One of the bulb holder tabs is wider and fits only in corresponding recess.
Turn bulb holder clockwise. Check that bulb illuminates. Replace tail lamp rim.
pg. 64 Replacing bulbs
file:///K|/ownersdocs/1979/1979_242_244_245/79242244245_03b.htm (10 of 22)12/22/2006 10:24:31 PM
