MAINTENANCE AND SERVICE
}}
345
When driving under adverse conditions, see
Engine oil - adverse driving conditions (p. 390).
IMPORTANT
In order to fulfil the requirements for the
engine's service intervals all engines are filled
with a specially adapted synthetic engine oil
at the factory. The choice of oil has been
made very carefully with regard to service life,
starting characteristics, fuel consumption and
environmental impact.
An approved engine oil must be used in order
that the recommended service intervals can
be applied. Only use a prescribed grade of oil
for both filling and oil change, otherwise you
will risk affecting service life, starting charac-
teristics, fuel consumption and environmental
impact.
Volvo Car Corporation disclaims all warranty
liability if engine oil of the prescribed grade
and viscosity is not used.
Volvo recommends that oil changes are car-
ried out at an authorised Volvo workshop.
Volvo uses different systems for warning of low/
high oil level or low oil pressure. Certain engine
variants have an oil pressure sensor, and then the
combined instrument panel's warning symbol for
low oil pressure is used . Other variants
have an oil level sensor, when the driver is
informed via the instrument's warning symbol
and display texts. Certain variants have
both systems. Contact a Volvo dealer for more
information.
Change the engine oil and oil filter in accordance
with the intervals specified in the Service and
Warranty Booklet.
Using oil of a higher than specified grade is per-
mitted. If the car is driven in adverse conditions,
Volvo recommends using an oil of a higher grade
than the one specified, see Engine oil - adverse
driving conditions (p. 390).
For filling capacities, see Engine oil - grade and
volume (p. 391).
Related information
•Engine oil - checking and filling (p. 345)
Engine oil - checking and filling
The oil level is detected with the electronic oil
level sensor.