WHEELS AND TYRES
353
IMPORTANT
The compressor must not be operated for
longer than 10 minutes - risk of overheating.
6. Inflate the tyre to the pressure specified in
accordance with the tyre pressure table, see
Tyres - approved tyre pressures (p. 429).
Release air using the pressure reducing
valve if the tyre pressure is too high.
7. Switch off the compressor. Detach the air
hose and the electrical cable.
8. Refit the dust cap on the tyre.
9.
Refit the valve cover
15
by pressing one edge
of the cover (the one without the hole) into
place (nearest the tyre), see Emergency
puncture repair - rechecking (p. 350). Then
fold the cover in toward the wheel rim - and
at the same time, gently press down the
angled top edge in order to help it in under
the edge of the wheel rim. Check that the
cover is flush with the surface of the wheel
rim - if not, gently press in the part that is
bulging out.
Related information
•
Emergency puncture repair (p. 346)
•
Emergency puncture repair kit - overview
(p. 347)
•
Emergency puncture repair - rechecking
(p. 350)
15
Only 17" wheel Thia
