484454
188
Zoom out
Zoom in
Vorherige Seite
1/226
Nächste Seite
187
Radio Data System - RDS
RDS is a system that links specific network
transmitters. It is used, for example, to tune the
correct frequency of a station irrespective of the
transmitter or the active sound source (e.g.
CD). The system can also be used for receiving
traffic information and for finding broadcasts of
a specific type. Radio text is also a component
of RDS. A radio station can transmit informa-
tion about the radio programme currently being
broadcast.
Some radio stations do not use RDS or only
use a limited range of its features.
PI search (automatic station
search)
When listening to an RDS transmitter, various
information, such as traffic information, is
stored in the radio.
When a preset RDS transmitter is later selected,
the radio updates the transmitters RDS
information. If the radio is at the boundary or
just outside of the transmitters range, the radio
automatically seeks the strongest possible
transmitter of that channel.
If there is no audible transmitter, the radio
quiets and the PI SEEK appears on the display
until the station is found.
Radio functions HU-450/650/850
Activate traffic information from a special
channel:
1. Select radio mode using the FM button.
2. Activate the station from which traffic
information is to be received.
3. Press SOURCE.
4. Turn SOURCE, select ADVANCED
MENU and press SOURCE.
5. Turn SOURCE, select RADIO
SETTINGS and press SOURCE.
6. Turn SOURCE, select TP STATION
and press SOURCE.
7. Turn SOURCE, select SET CURRENT
and press SOURCE.
8. Press EXIT.
Deactivating TP Station:
1. Select radio mode using the FM button
and press SOURCE.
2. Turn SOURCE, select ADVANCED
MENU and press SOURCE.
3. Turn SOURCE, select RADIO
SETTINGS and press SOURCE.
4. Turn SOURCE, select TP STATION
and press SOURCE.
5. Turn SOURCE, select TP STATION
OFF and press SOURCE.
6. Press EXIT.
Traffic information - TP
Station
Traffic information from RDS stations
interrupts other sound sources. The message is
heard at the volume set for this specific feature.
As soon as the message ends, the audio system
returns to the previous sound source and
volume setting.
Activating traffic information:
1. Select radio mode using the FM button
and press SOURCE.
2. Select TP and press SOURCE.
3. Turn SOURCE, select TP ON (flashing
text) and press SOURCE.
4. Press EXIT.
Deactivating TP:
1. Select radio mode using the FM button
and press SOURCE.
2. Select TP and press SOURCE.
3. Turn SOURCE, select TP OFF
(flashing text) and press SOURCE.
4. Press EXIT.
TP is shown on the display when the function
is activated. Press EXIT if you do not wish to
listen to a traffic bulletin.
The TP function remains active and the radio
waits for the next traffic bulletin.
188

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Volvo XC70 - 2005 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Volvo XC70 - 2005

Volvo XC70 - 2005 Bedienungsanleitung - Deutsch - 226 seiten

Volvo XC70 - 2005 Bedienungsanleitung - Holländisch - 226 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info