Bedienungsanleitung Volvo XC70 - 2006 (Seite 135 von 211) (Englisch)

484452

135

Zoom out

Zoom in

Vorherige Seite

1/211

Nächste Seite

127

Wheels and tires

Glossary of tire terminology

The tire suppliers may have additional

markings, notes or warnings such as standard

load, radial tubeless, etc.

Glossary of tire terminology

 Tire information placard: A placard

showing the OE (Original Equipment) tire

sizes, recommended inflation pressure, and

the maximum weight the vehicle can carry.

 Tire Identification Number (TIN): A

number on the sidewall of each tire

providing information about the tire brand

and manufacturing plant, tire size and date

of manufacturer.

 Inflation pressure: A measure of the

amount of air in a tire.

 Standard load: A class of P-metric or

Metric tires designed to carry a maximum

load at 35 psi [37 psi (2.5 bar) for Metric

tires]. Increasing the inflation pressure

beyond this pressure will not increase the

tires load carrying capability.

 Extra load: A class of P-metric or Metric

tires designed to carry a heavier maximum

load at 41 psi [43 psi (2.9 bar) for Metric

tires]. Increasing the inflation pressure

beyond this pressure will not increase the

tires load carrying capability.

 kPa: Kilopascal, a metric unit of air

pressure.

 PSI: Pounds per square inch, a standard

unit of air pressure.

 B-pillar: The structural member at the side

of the vehicle behind the front door.

 Bead area of the tire: Area of the tire next

to the rim.

 Sidewall of the tire: Area between the

bead area and the tread.

 Tread area of the tire: Area of the

perimeter of the tire that contacts the road

when mounted on the vehicle.

 Rim: The metal support (wheel) for a tire

or a tire and tube assembly upon which the

tire beads are seated.

 Maximum load rating: a figure indicating

the maximum load in pounds and kilograms

that can be carried by the tire. This rating is

established by the tire manufacturer.

 Maximum permissible inflation pressure:

the greatest amount of air pressure that

should ever be put in the tire. This limit is

set by the tire manufacturer.

 Recommended tire inflation pressure:

inflation pressure, established by Volvo,

which is based on the type of tires that are

mounted on a vehicle at the factory. This

inflation pressure is affected by the number

of occupants in the car, the amount of cargo,

and the speed at which the vehicle will be

driven for a prolonged period. This

information can be found on the tire

inflation placard(s) located on the drivers

side B-pillar or on the inside of the fuel

filler door on Canadian models, and in the

tire inflation table in this chapter.

 Cold tires: The tires are considered to be

cold when they have the same temperature

as the surrounding (ambient) air. This

temperature is normally reached after the

car has been parked for at least 3 hours.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Volvo XC70 - 2006 Seite 135

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Volvo XC70 - 2006

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info