Bedienungsanleitung Volvo XC70 - 2010 (Seite 267 von 306) (Englisch)

484441

267

Zoom out

Zoom in

Vorherige Seite

1/306

Nächste Seite

06 Maintenance and service

Car care

266 *Option/accessory, for more information, see Introduction.

ings to warm up and dry. Do the same thing

after starting in very damp or cold weather.

Exterior plastic, rubber and trim

components

A special cleaning agent available from Volvo

dealers is recommended for cleaning coloured

plastic parts, rubber and trim components,

such as glossy trim mouldings. When using

such a cleaning agent the instructions must be

followed carefully.

IMPORTANT

Avoid waxing and polishing on plastic and

rubber.

When using degreasant on plastic and rub-

ber, only rub with light pressure if it is nec-

essary. Use a soft washing sponge.

Polishing glossy trim mouldings could wear

away or damage the glossy surface layer.

Polishing agent that contains abrasive must

not be used.

Rims

Only use rim cleaning agent recommended by

Volvo.

Strong rim cleaning agents can damage the

surface and cause stains on chrome-plated

aluminium rims.

Polishing and waxing

Polish and wax the car if the paintwork is dull

or to give the paintwork extra protection.

The car does not need to be polished until it is

at least one year old. However, the car can be

waxed during this time. Do not polish or wax

the car in direct sunlight.

Wash and dry the car thoroughly before you

begin polishing or waxing. Clean off asphalt

and tar stains using Volvo tar remover or white

spirit. More stubborn stains can be removed

using fine rubbing paste designed for car paint-

work.

Polish first with a polish and then wax with liq-

uid or solid wax. Follow the instructions on the

packaging carefully. Many preparations con-

tain both polish and wax.

IMPORTANT

Paint treatment such as preserving, sealing,

protection, lustre sealing or similar could

damage the paintwork. Paintwork damage

caused by such treatments is not covered

by Volvo warranty.

Water-repellent coating*

Never use products such as car wax,

degreaser or similar on glass surfa-

ces as this could ruin their water-repellent

properties.

Take care when cleaning so as not to damage

the glass surface.

To avoid damaging glass surfaces when

removing ice – only use plastic ice scrapers.

There is natural wear of the water-repellent

coating.

Treatment with a special finishing agent avail-

able from Volvo dealers is recommended in

order to maintain the water-repellent proper-

ties. This should be used first after three years

and then each year.

Rustproofing – inspection and

maintenance

The car received a thorough and complete

rustproofing at the factory. Parts of the body

are made of galvanised sheet metal. The

underbody is protected by a wear-resistant

anti-corrosion compound. A thin, penetrating

rustproofing fluid was sprayed into the

exposed members, cavities, closed sections

and side doors.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Volvo XC70 - 2010 Seite 267

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Volvo XC70 - 2010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info