10 Maintenance and service
10
* Option/accessory, for more information, see Introduction.
349
Remove the rear cover by screwing one
quarter turn and lifting it away.
WARNING
Connect and remove the positive and neg-
ative cables in the correct order.
Detach the black negative cable.
Detach the red positive cable.
Detach the ventilation hose from the bat-
tery.
Loosen the screw holding the battery
clamp.
Move the battery aside.
Lift it up.
Fitting
1. Lower the battery into the battery box.
2. Move the battery inward and to the side
until it reaches the rear edge of the box.
3. Tighten the clamp that holds the battery.
4. Connect the ventilation hose.
> Check that it is correctly connected to
both battery and outlet in the body.
5. Connect the red positive cable.
6. Connect the black negative cable.
7. Press in the rear cover. (See earlier sec-
tion "Removal".)
8. Fit the rubber moulding. (See "Removal".)
9. Align the front cover and secure it with
the clips. (See "Removal".)
For more information on the car's battery -
Electrical system (p. 399).
Battery - Start/Stop
Cars with the Start/Stop function are equip-
ped with two 12 V batteries - one extra pow-
erful battery for starting and one support bat-
tery that helps during the Start/Stop func-
tion's starting sequence.
For more information on Start/Stop - see
Start/Stop* (p. 266).
For more information on the car's battery -
see Jump starting with battery (p. 257) and
Starter battery - specification (p. 400).
Battery Starting Auxiliary
Cold start
capacity
A
,
CCA (A)
760 180
Size
B
,
L×W×H
(mm)
278×175×190 150×90×130
Capacity
(Ah)
70 10
A
In accordance with the SAE standard.
B
Largest possible size.
