Bedienungsanleitung Vonroc AG502AC (Seite 8 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch)

778560

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

WWW.VONROC.COM

TECHNICAL SPECIFICATIONS

Model No. AG502AC

Mains voltage 220-240V~

Mains frequency 50 Hz

Power input 650 W

No-load speed 12.000/min

Grinding disc

Diameter:

Bore:

125 mm

22.2 mm

Spindle thread M14

Weight 1.69 kg

Noise and vibration

Sound pressure level L

86 dB(A), K=3dB(A)

Acoustic power level L

97 dB(A), K=3dB(A)

Vibration 2.48 m/s

, K=1.5 m/s

Wear hearing protection.

Vibration level

The vibration emission level stated in this instruc-

tion manual has been measured in accordance

with a standardized test given in EN60745; it may

be used to compare one tool with another and as

a preliminary assessment of exposure to vibration

when using the tool for the applications mentioned.

• Using the tool for different applications, or with

different or poorly maintained accessories, may

signiﬁcantly increase the exposure level.

• The times when the tool is switched off or when

it is running but not actually doing the job, may

signiﬁcantly reduce the exposure level.

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work patterns.

DESCRIPTION

The numbers in the text refer to the diagrams on

pages 2 - 3

Fig. A

1. On/off switch

2. Spindle lock button

3. Spindle

4. Guard

5. Main grip

6. Auxiliary grip

3. OPERATION

Before assembly, always switch off the

machine and remove the mains plug from

the mains.

Mounting and removing the guard & grinding disc

(ﬁg. B)

Do not use the machine without the guard.

Mounting

• Place the machine on a table with the spindle

(3) facing upwards.

• Keep the spindle lock button (2) pressed and

remove the ﬂange (7) using the ﬂange key (8).

• If necessary, remove the grinding disc (9).

• Remove the ﬂange (10).

• Mount the guard (4). Secure the guard (4) by

tightening the screw (11) and the nut (12).

• Mount the ﬂange (10).

• If necessary, mount the grinding disc (9).

• Keep the spindle lock button (2) pressed and

mount the ﬂange (7) using the ﬂange key (8).

Removing

• Place the machine on a table with the spindle

(3) facing upwards.

• Keep the spindle lock button (2) pressed and

remove the ﬂange (7) using the ﬂange key (8).

• If necessary, remove the grinding disc (9).

• Remove the ﬂange (10).

• Remove the guard (4) by loosening the screw

(11) and the nut (12).

• Mount the ﬂange (10).

• If necessary, mount the grinding disc (9).

• Keep the spindle lock button (2) pressed and

mount the ﬂange (7) using the ﬂange key (8).

Mounting and removing the auxiliary grip (ﬁg.C)

Mounting

• Tighten the auxiliary grip (6) into one of the

mounting holes (13).

Removing

• Loosen the auxiliary grip (6) from the mounting

hole (13).

Switching on and off (ﬁg. A)

• To switch on the machine in continuous mode,

slide the on/off switch (1) in the direction of the

grinding disc.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc AG502AC Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info