Bedienungsanleitung Vonroc BG501AC (Seite 6 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

764089

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

WWW.VONROC.COM

• Are the power cord and plug in good conditi-

on (solid, without fraying or other damage)?

• Avoid the use of long extension cords. The ex-

tension cords you use must always be earthed.

• A grinding wheel is a brittle tool piece. The

stone is not resistant to knocks.

• Always grind on the front edge of the grinding

wheel, and never on the side of the grinding

wheel. Never ﬁt a cracked grinding wheel.

Replace it immediately, as the high rotational

speed could cause the stone to ﬂy apart, cau-

sing a serious accident.

• Always wear safety glasses when grinding.

• Never grind without the cover ﬁtted over the

grinding wheel.

• Always ﬁt the grinding wheel cover and tool rest

tightly, and with the correct clearance.

• Never allow more than 1-1.5 mm clearance

between tool rest and grinding wheel.

• Only use the grinding wheel for the work it was

designed for (for example sharpening tools),

and NOT for heavy construction work.

• The following information must be available,

before you ﬁt any new grinding wheel:

• Details about the manufacturer.

• Binding material.

• Dimensions.

• Permissible rotational speed.

• Never ream out the hole in a grinding wheel to a

larger diameter.

• The maximum rotational speed of the grinding

wheel should never be allowed to exceed the

maximum speed given for the wheel.

• Never use any grinding wheel that is damaged

or deformed.

• In order to be able to grind safely, the machine

must be ﬁrmly bolted to a workbench.

•

The tool rest should be replaced whenever the

width of the tool rest measures less than 20 mm.

• The recommended depth of the recess in the

ﬂange (T) is 2 mm and the diameter of the

spindle hole is 10 mm (see Fig. B).

• Always keep the cord away from the moving

parts of the machine.

•

In the case of locking, switch the machine off im-

mediately and remove the plug from the mains.

• Compare the maximum number of revolutions

allowed of the accessories with the number of

revolutions of the machine.

• When you put the machine away the engine

must be switched off and moving parts must

have reached a standstill.

• Never attach an assembly spanner to your ma-

chine with a piece of string or anything similar.

•

Never use the axle locking button if the machine

is operating.

• Make sure that the spring chuck diameter is the

same as the axle diameter of the accessory.

• Use a clamping device for securing the work

piece.

• Keep your hands away from the work piece.

Whenever using the machine

• Check that the switch is NOT in the ‘ON/1’

position before connecting the machine to the

power supply.

• Always keep the power cord out of the way of

the tool’s moving parts.

Immediately switch off the machine when:

• The plug or power cord is defective or damaged.

• The switch is defective.

• You smell smoke or burning insulation.

Electrical safety

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of ﬁre, electric shock and personal

injury. Read the following safety instructions.

Always check that the voltage of the power

supply corresponds to the voltage on the

rating plate label.

Replacing cables or plugs

Immediately throw away old cables or plugs when

they have been replaced by new ones. It is dangerous

to insert the plug of a loose cable in the wall outlet.

Using extension cables

Only use an approved extension cable suitable

for the power input of the machine. The minimum

conductor size is 1.5 mm2. When using a cable reel

always unwind the reel completely.

2. MACHINE INFORMATION

Intended use

The bench grinder is a combination tool for the

grinding and polishing of metals, plastics and other

materials using the appropriate grinding wheels.

The ﬂexible shaft is intended to function as a grin-

der, sander, wire brush, polisher, carving or cut-off

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc BG501AC Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info