Bedienungsanleitung Vonroc CD503DC (Seite 8 von 48) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

763966

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

WWW.VONROC.COM

Eccentric Driver Head/Angle Driver Head Attachments

(Fig. B)

The eccentric driver head (12) allows screwdriving

close to edges. The angle driver head (13) allows

screwdriving at hard to reach locations. The attach-

ments can be mounted offset in different angles.

To assemble an attachment:

• Move the direction switch (5) to the middle

position, preventing accidental activation of

the on/off switch.

• Pull off the cover (9) towards the front.

• Carefully push the attachment onto the

machine.

To disassemble an attachment:

• Move the direction switch (5) to the middle

position.

• Push the unlock buttons (11) on both sides of

the machine.

• Carefully pull the attachment off the machine.

4. MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

battery pack from the machine.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that the

ventilation openings are free of dust and dirt. Re-

move very persistent dirt using a soft cloth moist-

ened with soapsuds. Do not use any solvents such

as gasoline, alcohol, ammonia, etc. Chemicals such

as these will damage the synthetic components.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected at

the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/

EC for Waste Electrical and Electronic Equipment

and its implementation into national right, power

tools that are no longer usable must be collected

separately and disposed of in an environmentally

friendly way.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of defects

in both materials and workmanship for the period

lawfully stipulated starting from the date of original

purchase. Should the product develop any failure du-

ring this period due to defective material and/or work-

manship then contact VONROC directly. The following

circumstances are excluded from this guarantee:

• Repairs and or alterations have been made

or attempted to the machine by unauthorized

service centers;

• Normal wear and tear;

• The tool has been abused, misused or

improperly maintained;

• Non-original spare parts have been used.

This constitutes the sole warranty made by compa-

ny either expressed or implied. There are no other

warranties expressed or implied which extend

beyond the face hereof, herein, including the im-

plied warranties of merchantability and ﬁtness for

a particular purpose. In no event shall VONROC be

liable for any incidental or consequential damages.

The dealers remedies shall be limited to repair or

replacement of nonconforming units or parts.

The product and the user manual are subject to

change. Speciﬁcations can be changed without

further notice.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc CD503DC Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info