Bedienungsanleitung Vonroc CF501DC (Seite 7 von 72) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

819193

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

WWW.VONROC.COM

Inserting the battery into the machine (Fig. B, F)

Ensure that the exterior of the battery is

clean and dry before connecting to the

charger or machine.

1. Insert the battery (9) into the base of the ma-

chine as shown in Fig. F.

2. Push the battery further forward until it clicks

into place.

Removing the battery from the machine (Fig. F)

1. Push the battery unlock button (10).

2. Pull the battery out of the machine like shown

in Fig. F.

Checking the battery charging status (Fig. G)

• To check the battery charge status, push the

button (11) on battery shortly.

• The battery has 3 lights indicating the charge

level, the more lights that burn, the more

charge the battery has left.

• When the lights are not burning it means the bat-

tery is empty and must be charged immediately.

Charging the battery with the charger (Fig. G)

1. Take the battery (9) from the machine.

2. Turn the battery (9) to upside down position and

slide it onto the charger (13) as shown in Fig. G.

3. Push the battery until it is fully pushed into the

slot.

4. Plug the charger plug into an electrical outlet and

wait for a while. The LED indicators on the charger

(13) will lighten up and show the charger status.

The charger has 2 LED indicators (14) which indi-

cate the status of the charging process:

Red LED Status Green LED status Charger status

Off Off No power

Off On

Standby mode:

- No battery is

inserted or,

- Battery inserted

but charging has

ﬁnished

On Off Battery charging in

progress

After the battery is fully charged remove the charg-

er plug from the outlet and remove the battery from

the charger.

When the machine is not being used over a

longer period of time it is best to store the

battery in charged condition.

4. OPERATION

This machine can have its power supplied by using

a battery (9) or by connecting the AC adapter (8). If

the battery and AC adapter are connected simulta-

neously the fan will be powered by the AC adapter

and the battery will not be charged.

Switching the machine on and off (Fig. A)

1. To switch the fan on, press the switch button

(1) and hold it for 2 seconds.

2. To switch the fan off, press the switch button

(1) and the fan stops immediately.

Wind speed adjustment (Fig. A)

The fan has 3 wind speed settings.

• Push the speed adjustment button (2) to switch

between the 3 speed settings. The wind speed

increases when pressing the button and will

return to the lowest setting when running at the

highest speed.

• If the fan is switched on it will always start at

the lowest speed setting.

Head position adjustment (Fig. A, B)

•

The fan head (3) can be positioned in a variety

of positions, 360° all around. To adjust the fan

head loosen the adjustment knobs (5) and posi-

tion the fan head (3) in the desired position, and

fasten the adjustment knobs (5) subsequently.

Hanging the jobsite fan (Fig. D, E)

•

The fan can be hung on the supplied hook (6),

then place the fan head (5) in the desired position.

• The fan can also be hung under a ﬂat, horizon-

tal surface. The metal base (4) should be hung

upside down on a horizontal surface. Make sure

the 3 rubber feet do rest stable on the surface.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc CF501DC Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info