Bedienungsanleitung Vonroc CS502AC (Seite 4 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch)

778299

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

WWW.VONROC.COM

1. SAFETY INSTRUCTIONS

Read the enclosed safety warnings, the additional

safety warnings and the instructions. Failure to

follow the safety warnings and the instructions may

result in electric shock, ﬁre and/or serious injury.

Save the safety warnings and the instructions for

future reference

The following symbols are used in the user

manual or on the product:

Read the user manual.

Denotes risk of personal injury, loss of life

or damage to the tool in case of non-obser-

vance of the instructions in this manual.

Risk of electric shock.

Immediately remove the mains plug from

the mains if the mains cable becomes

damaged and during cleaning and

maintenance.

Class II machine - Double insulation - You

don’t need any earthed plug.

Keep bystanders, especially children and

pets, at a distance greater than 10m.

Wear eye protection.

Wear ear protection.

Wear a dust mask protection.

Ø20mm

Ømax.

185mm

Take note of the dimensions of

the saw blade. The hole

diameter must ﬁt the tool

spindle without play. If it is

necessary to use reducers,

ensure that the dimensions of

the reducer are suitable for

the base blade thickness and

the saw blade hole diameter,

as well as the tool spindle

diameter. Wherever possible,

use the reducers provided

with the saw blade. The saw

blade diameter must match

the information speciﬁed on

the symbol.

Danger Area! Keep hands far away (10cm)

from the cutting area while the machine is

running. Danger of injury when coming in

contact with the saw blade.

Do not dispose of the product in unsuitable

containers.

The product is in accordance with the

applicable safety standards in the European

directives.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings and all

instructions. Failure to follow the warnings

and instructions may result in electric

shock, ﬁre and/or serious injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers to

your mains-operated (corded) power tool or batte-

ry-operated (cordless) power tool.

1) Work area safety

a) Keep the work area clean and well lit. Cluttered

or dark areas invite accidents.

b) Do not operate power tools in explosive atmos-

pheres, such as in the presence of ﬂammable

liquids, gases or dust. Power tools create

sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while ope-

rating a power tool. Distractions can cause you

to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiﬁed plugs and matching outlets

will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tric shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc CS502AC Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info